Filter
Top Products
Before You Call for Service I0
If the cooling fan continues to operate after the oven has
been turned off:
€ this is normal. The fan will automatically shut off when
the oven is cooled.
If a fan is heard while using the broil or clean modes:
• this is the cooling fan and is normal. The fan will
continue to mn after use until the oven cools.
Fault Codes
€ fault codes are shown in the display as "F" and a number.
If a fault code appears in the display and beeps sound,
press the Cancel pad. If the fault code and beeps con-
tinue after pressing cancel, disconnect power to the wall
oven. Wait a few minutes, then reconnect power to the
oven. If the fault code and beeps still continue, discon-
nect power to the wall oven and call an authorized servicer°
• if the oven is heavily soiled, excessive flare-ups may re-
sult in a fault code during a clean cycle. Press Cancel
pad and allow the oven to cool for one hour, then reset
the clean cycle. If the fault code and beeps still continue,
disconnect power to the appliance and call an authorized
servicer.
• if an error beep sounds (two short beeps) with no fault
code in the display, clean any spill from key pad area
within 30 seconds. If, after 30 seconds the spill is not
removed or another problem exists, an F7 fault code will
be displayed. Disconnect power to the appliance and call
an authorized servicer.