Filter
Top Products
Clock functions
Information about the clock functions
After a clock function has been selected, the
corresponding symbol flashes for about 5
seconds. During this time, the desired times
can be set or modified using the or button
When the desired time has been set, the
corresponding symbol continues to flash for
approx. 5 seconds. After this the symbol
illuminates. The set time begins to run.
Using residual heat with the
DURATION and END clock
functions
When the DURATION and END
clock functions are used, the oven
switches the heating elements off,
when 90% of the time set or
calculated has elapsed.
The residual heat present is used to
continue the cooking process until
the time set has elapsed (3 to 20
mins.).
The clock functions display shows the
period of operation for the
selected oven function, if none of
the clock functions MINUTE
MINDER , DURATION or END is set.
To turn off the audible signal: Press
any button.
MINUTE MINDER
To set a countdown. A signal sounds after
the time has elapsed.
This function does not affect the functioning
of the oven.
1. 1. Press the SELECTION button
repeatedly, until MINUTE MINDER and
the symbol is displayed.
14.35 00.00
MINUTE MINDER
2. 2. Using the or button, set the desired
Countdown time (max. 99 minutes).
After about 5 seconds the display shows the
time remaining. OVEN FUNCTIONS and
the symbol are shown in the display.
OVEN FUNCTIONS
14.35
03.49
When the time has elapsed, an audible signal
sounds for 2 minutes. “00.00” and the
symbol flash.
14.38 00.00
MINUTE MINDER
DURATION
To set how long the oven is to be in use.
1. Select oven function and temperature.
14.35
200 ûc
00.00
î
DURATION
2. Press the SELECTION button
repeatedly until DURATION and
thesymbol is displayed.
21