Filter
Top Products
5. Put the metal frame and seal back in
place, insert screws, and tighten.
6. Replace the side rails.
Oven door glass and
water collecting channel
The oven door is fitted with three panels of
glass mounted one behind the other and a
water collecting channel. The inner panels
and the water collecting channel can be
removed for cleaning.
Important! Rough handling, especially
around the edges of the front panel, can
cause the glass to break.
Removing the door glass and
water collecting channel
1. Open the oven door as far as it will go.
90°
2.
Undo the clamping levers (A) on
both door hinges fully .
A
A
3. Close the oven door as far as the first
position (approx. 45°).
4. Take hold of the door trim (B) on the
upper edge of the door at both sides and
press inwards to release the clip seal.
Then remove the door trim by pulling
upwards.
26