Filter
Top Products
15
Semi-Automatic Cooking
This setting automatically switches off the oven when
required and should be used when the oven is already on.
Press the Time button and the display will show the
figures ; hold down and at the same time press
one
of the value buttons - or + to set the cooking duration.
Release the Time button to begin the countdown of the
selected cooking time. The display will show the
current time together with symbols AUTO and .
Automatic Cooking
This setting switches the oven on and off automatically.
Press the Time button and the display will show the
figures ; hold down and at the same time press one
of the Value buttons - or + to set the cooking duration.
Press
the End of cooking button. The display shows the
sum of the current time plus the cooking duration. Hold
down and at the same time press the value buttons - or +
to set the time you would like the food to be ready for.
Release the
End of cooking button to begin the
programmed count
down. The display shows the current time
together with symbols AUTO and .
After you have set the Automatic timer,
press button Time to see the remaining
cooking time. Press button End of cooking
to see the end of cooking time.
End of cooking
At the end of the programmed cooking time, the oven
switches off automatically and an intermittent bell
rings. After switching off the bell, the display once again
shows the current time together with symbol , which
indicates the oven has returned to the manual setting.
Adjusting the volume of the bell
The volume of the bell can be varied (3 levels) by pressing,
whilst it is ringing, the Value button -
Switching off the bell
You can switch it the bell off manually by pressing the
Manual button or any of the timer buttons. The bell
automatically stops ringing after seven minutes.
After pressing the Manual button the oven
begins to operate once again: to switch it off,
turn the function control knob and the
thermostat control knob to “0”.
The oven switches off regardless of the cooking function
or temperature selected and the AUTO symbol flashes.
To stop the AUTO symbol flashing, press the Manual button.
Once the bell is switched off, the oven begins to operate again.
To switch the oven off, turn the function control knob and
thermostat control knob to “0”.
Timer
The LED digital display can also be used as a simple
timer.
Using the display as a simple timer does not
interrupt the operation of the oven at the end
of the set time.
Press
the Minute timer button and the display shows the
figures . Hold down Minute timer and at the same time
press the value buttons - or +. Release the button Minute
timer to begin the programmed countdown and the display
shows symbols and .
After programming the timer, the display once more shows
the current time. To display the time remaining
again, press
the Minute timer button.
You cannot set inconsistant values when using
the automatic timer. (For example, a cooking
time that would be longer than the required
end of cooking time).
Cancelling set data
Whilst the timer is set, hold down the button for the
function you wish to cancel and reduce the time to the
value using the Value buttons - or +. Cancelling
the selected timer function means the cooker reverts to
the manual setting.
Changing set data
The times set for cooking and ending can be changed by
holding down the required function button and pressing the
Value buttons - or + until the display shows the new times.