Filter
Top Products
19
2 Preparation
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example: Proceed as follows to prepare one latte macchiato.
T Attach the milk pipe to the cappuccino frother. Use the long
pipe for a milk carton/bottle and the short pipe for the milk
container.
T Insert the other end of the milk pipe into a milk carton/bot-
tle or connect it to a milk container.
T Place a glass under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the milk
foam position 5.
q T Press the Latte Macchiato button.
If an energy-saving mode is set, the machine heats up first.
E
Press the Latte Macchiato button once more as soon as
COFFEE READY is displayed again.
1 LATTE MAC. and the coffee strength is displayed.
1 LATTE MAC. / 1 MILK, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
1 LATTE MAC.
There is a short interval while the hot milk separates from the E
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 ‘Permanent settings in program-
ming mode – Products’).
1 LATTE MAC. / COFFEE, coffee preparation starts.
The preset amount of water flows into the cup. Preparation
stops automatically and
ENJOY appears briefly on the dis-
play. Then
COFFEE READY is displayed.
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the cap-
puccino frother’).
Latte macchiato,
cappuccino