Filter
Top Products
32
4 Permanent settings in programming mode
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
You can choose which logo is displayed when the display is not
being used to display any other information. The available logos
include:
JURA logo
U
Animated coffee cup
U
No logo (
U
NOT ACTIVE)
Example: Proceed as follows to display the JURA logo.
Precondition:
COFFEE READY is displayed.
k T Press and hold the Rotary Switch until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
LOGO is displayed.
k T Press the Rotary Switch to enter the programme item.
LOGO
g T Turn the Rotary Switch until LOGO / JURA is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
LOGO / JURA
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY / JURA
In the programme item RESET you can reset various settings to
their factory settings:
PRODUCT
U
The settings (amount of water, aroma, temperature etc.) for
U
any product can be reset individually to the factory settings.
The corresponding double product is reset to the factory
settings at the same time.
ALL PROD.
U
The settings (amount of water, aroma, temperature etc.) for
U
all products are reset to the factory settings.
RESET ALL
U
All customer settings
U
are reset to the factory settings. Your
IMPRESSA then switches off.
Logo
Restore factory settings