Jura Capresso 68193 Coffeemaker User Manual


 
Please note: If the Ground Coffee button (Fig. 3A,O) is
pressed by mistake just press one of the coffee buttons, NOT
ENOUGH PRE-GROUND
. The machine will automatically stop
and return to COFFEE READY.
Please note: After use of sugar coated or flavored coffee
through the pre-ground coffee funnel you may experience some
flavor transfer when switching back to your regular coffee.
10. AUTO CAPPUCCINO SYSTEM
The S9 OT features the Auto Cappuccino System with two spouts
located behind each other (Fig. 15) The front spout produces
steam (steam nozzle). The rear spout produces high pressure
brewed coffee. Attached to the steam nozzle is the removable
frothXpress system. It siphons, steams and froths milk.
The S9 OT Cappuccino System prepares a variety of milk based
drinks without ever moving the cup: Cappuccino, Latte, Latte
Macchiato, Café Mocha, Hot Milk, Hot Chocolate.
10a. PREPARING THE THERMAL MILK CONTAINER
The S9 OT comes with a 20 oz. double walled vacuum stainless
steel container. This custom-made milk container can keep cold
milk cold for up to eight hours. There is no need to worry about
the milk getting warm during the day.
The milk container comes complete with: • lid and attached
stainless steel hose • two short flexible hoses • one long flexible
hose • spare black and transparent fittings (Fig. 14a, 14b).
The two short hoses have a connecting piece on each end.
Unscrew the milk container lid. A stainless steel hose is
attached to the inside of the container. A small transparent
fitting holds the hose in place (a spare fitting is included).
Rinse the milk container with fresh water before first use and
fill with fresh cold milk. Close the lid.
Insert one end of the short flexible hose into the lid opening.
Remove the red cap from the side of the frothXpress and
insert the other end of the short flexible hose (Fig. 15).
You are ready to steam/froth milk.
Storing the milk container: always remove the outside flexible
hose and open the lid before storing the milk container in the
refrigerator.
Important: The milk container is not dish washer safe. Do not
immerse the milk container in any liquid.
Using the long flexible hose: To siphon milk directly from a milk
carton use the long flexible hose. Insert one of the black con-
necting pieces in the straight-cut end of the hose and insert into
the frothXpress. Insert the other end with the V-cut into the milk
container (Fig. 17).
10b. THE FROTHXPRESS SYSTEM
This system produces unlimited amounts of hot steamed or
frothed milk right into your cup.
Important: This system siphons milk and mixes it inside the
frothXpress with hot steam. It is necessary that all parts are
connected tightly, otherwise the siphoning process will not work.
Frothing Position: The dial points to the upper part of the face
(12 to 2 o’clock). This section is used for Cappuccino and Latte
Macchiato. In the 12 o’clock position the frothXpress creates the
most milk froth. Turning the dial towards the 2 o’clock position
increases the milk temperature (Fig. 16).
Steaming Position: The dial points to the lower part of the face
18.