Filter
Top Products
can resume brewing coffee.
Make sure the Dual Coffee Spouts are moved upwards. Carefully
lift and pull out the removable drawer (Fig. 18 and 19).
TRAY
MISSING. There is water in the drawer. Empty the drawer and
the used coffee container, assemble and replace. Make sure the
two metal contacts of the drawer are clean and dry.
Please note: If the machine is not used for a few days, pull out
the tray and empty the used coffee container. Used, moist coffee
grounds can develop mold and mildew.
Important: If you pull out the drawer without any corresponding
message in the display you must empty the used coffee container.
The machine assumes that it will be emptied. If you do not empty
the container, used coffee will overflow inside the machine and
cause serious damage to the coffee release mechanism.
Please note: The machine does not sense if the used coffee
container (Fig. 1,16) is inserted. If the used coffee container is
not inserted, ground coffee discharges onto the drawer.
TRAY MISSING
Insert the drawer with the empty used coffee container. Make sure
the metal contacts in the back of the drawer are clean and dry.
FILL BEANS
Add beans to the bean container.
COFFEE READY / CLEAN MACHINE
After approx. 220 coffee brewings or 80 initial rinsing cycles you
must run a tablet cleaning cycle. You can still make coffee, how-
ever we highly recommend to perform the cleaning cycle within
the next few days (chapter 16.1).
COFFEE READY / CLEAN NOW
After 30 more coffee brewings the message reads CLEAN NOW.
COFFEE READY / DECALCIFY MACHINE
It is time to decalcify the machine. You can still make coffee,
however we highly recommend to perform the decalcifying cycle
within the next few days (chapter 17.1).
Please note: If you use the Clearyl cartridge and the message
appears, then your cartridge function was not activated. Follow
the instruction in chapter 13a to program and activate the
cartridge. If the cartridge is already in use for several weeks
install a new cartridge.
COFFEE READY / DECALCIFY NOW
It is urgent to decalcify the machine.
COFFEE READY / CHANGE FILTER
It is time to replace the Clearyl filter (chapter 13b).
NOT ENOUGH PRE-GROUND
Not enough pre-ground coffee was filled into the ground coffee
funnel (Fig. 1,11). The S9 OT stops the operation (chapter 9e).
15.1 MANUAL MAINTENANCE CYCLES
The S9 OT will display when it’s time to perform certain cleaning
programs. You can also manually access these programs and
perform them.
COFFEE READY.
• Push the Rotary Dial until the display shows
MAINTENANCE.
• Push the Dial again, CLEAN CAPPUCCINO.
• Turning the dial shows you which programs you can access:
CLEAN CAPPUCCINO (chapter 15.5)
RINSE MACHINE (see example below in chapter 15.1)
RINSE CAPPUCCINO (chapter 10g)
CLEAN MACHINE (chapter 16.1)
DECALCIFY MACHINE (chapter 17.1)
CHANGE FILTER (chapter 13c)
30.