Filter
Top Products
Example:
Set the On-time to 6:15 AM and program the S9OT not to turn
on automatically on Sundays.
COFFEE READY
• Push the Rotary Dial until the display shows MAINTENANCE.
• Turn the Dial until the display shows UNIT ON/OFF.
• Push the Dial
UNIT ON --.--, push again UNIT ON --.--.
• Turn the dial to set the hours UNIT ON 6:00 AM and push the
Dial to confirm. UNIT ON 6:00 AM.
• Turn the Dial to set the minutes UNIT ON 6:15 AM and push
to confirm.
CONFIRMED ✓, then UNIT ON 6:15 AM.
• Turn the Rotary Dial until
ON/OFF / MON YES is displayed
and push ON/OFF / MON YES.
• Turn the dial until
ON/OFF / SUN YES is displayed and push
ON/OFF / SUN YES.
• Turn the dial until display shows ON/OFF / SUN NO and push
to confirm
CONFIRMED ✓and then ON/OFF / SUN NO.
• Turn the dial to
EXIT and push. The display shows
ON/OFF / MON YES.
• Turn the dial to EXIT and push. COFFEE READY.
14.6 AUTO-OFF
The S9 OT is pre-set to turn itself off 5 hours after last use.
You can change the auto-off interval between 0.5 and 15 hours
or you can set the machine not to turn itself off.
Recommendations: If you only use the machine in the morning,
change the auto-off to 2 hours. If you use the machine all day
long, leave the auto/off as is. This way the machine is always
ready, and it is not necessary to turn it on and to warm up.
Example:
Change the auto-off from 5 hours to 2 hours after last use.
COFFEE READY.
• Push the Rotary Dial until the display shows MAINTENANCE.
• Turn the Dial until the display shows OFF AFTER 5 H.
• Push the Dial OFF AFTER 5 H.
• Turn the dial until display show
OFF AFTER 2 H and push to
confirm.
CONFIRMED ✓, OFF AFTER 2 H.
• Turn the dial to
EXIT and push. COFFEE READY.
14.7 RINSE SETTINGS
This program allows you to change both the Rinse cycle and the
Cappuccino Rinse cycle.
Rinse cycle (INIT RINSE)
After turning the machine on with the On/Off button, the S9 OT
heats up and then prompts you to run a short rinse cycle
(chapter 8). You can re-program this function so that this rinse
cycle is done automatically.
Example:
Change the initial rinse cycle from manual to automatic:
COFFEE READY.
• Push the Rotary Dial until the display shows MAINTENANCE.
• Turn the Dial until the display shows RINSES and push the
dial. INIT RINSE MANUAL.
• Push the dial again,
INIT RINSE MANUAL and turn to
INIT RINSE AUTO and push to confirm. CONFIRMED ✓
then INIT RINSE AUTO.
• Turn the dial to
EXIT and push the dial RINSES.
• Turn the dial to EXIT and push COFFEE READY.
28.