13
6. Rinsing the machine
If the coffee machine is switched off and has cooled down,
you will be prompted to start a rinsing cycle when switching
the machine back on. The machine automatically performs a
rinsing cycle when you switch it off.
Ⅲ PRESS MAINTENANCE
Ⅲ
Ⅲ Place a cup under the height-adjustable coffee spout (11).
Ⅲ Press the maintenance key (C).
Ⅲ RINSING
Ⅲ
Ⅲ COFFEE READY
Ⅲ
You can also trigger a rinsing cycle manually from the main-
tenance menu at any point in time (see Chapter 15.3).
With manually triggered rinsing, all the spouts that were
used are rinsed.
7. Making coffee
(1 espresso, 2 espressos, 1 coffee, 2 coffees)
Ⅲ COFFEE READY
Ⅲ
Ⅲ Place 1 or 2 cups (as required) under the adjustable coffee spout
(11) and press the corresponding symbol , , , . The
pre-brewing process (I.P.B.A.S.) moistens the coffee powder,
briefly interrupts the flow of hot water and then begins with the
actual brewing process.
Ⅲ 1 ESPRESSO (example)
Ⅲ STRONG (example)
Ⅲ The coffee brewing process stops automatically as soon as the
set amount of water has run through.
Ⅲ COFFEE READY
Ⅲ
To stop the brewing process prematurely, press any of the
draw-off keys.
You can pre-select the strength of your coffee when the ma-
chine is ready to brew ( PLEASE SELECT) To do
so, turn the Rotary Switch (B) until the display indicates the
desired coffee strength and then press a coffee key of your
choice , , , .
You can change the amount of water to be used while the
machine is brewing coffee. To do so, turn the Rotary Switch
(B) until the display indicates the required amount (ML). The
amount of water can be selected in increments of 5 ML.
The amounts given in ML are approximate values and may
vary from the effective quantity.
8. Making special coffee
Ⅲ COFFEE READY
Ⅲ
Ⅲ Place 1 cup under the cappuccino nozzle (4) and press the
Special Coffee key . The pre-brewing process (I.P.B.A.S.)
moistens the coffee powder, briefly interrupts the flow of hot
water and then begins with the actual brewing process.
Ⅲ SPECIAL CUP
Ⅲ MILD (example)
Ⅲ The coffee brewing process stops automatically as soon as the
set amount of water has run through.
E