Jura Capresso Z5 Coffeemaker User Manual


 
16
MACHINE IS CLEANING
COFFEE READY
9.4 Cleaning the cappuccino nozzle
Despite the cappuccino cleaning cycle, you should regularly
disassemble the cappuccino nozzle and rinse it under running
water.
Remove the cappuccino nozzle from the IMPRESSA and take it
apart as shown in Fig. 11.
Thoroughly rinse all the parts of the nozzle under running water.
Re-assemble the cappuccino nozzle and attach it to your
IMPRESSA.
10. Making hot milk
COFFEE READY
Take the milk hose out of the Welcome Pack. (We recommend
using the short hose with the vacuum milk container and the
long hose with a milk carton). Connect the hose with the suction
pipe projecting from the vacuum milk container. Then attach the
other end of the hose to the cappuccino nozzle (Fig. 8).
Turn the selector switch (1, Fig. 9) to “Milk” (b, Fig. 9).
Place 1 cup or 1 glass under the cappuccino nozzle (4) and press
the Milk key .
MILK
20 SEC (example)
The machine stops dispensing milk automatically as soon as the
set amount of milk (in SEC) has been dispensed.
COFFEE READY
To stop the machine dispensing milk prematurely, press any
of the product keys.
10 min. after having made cappuccino or frothed milk, your
IMPRESSA will prompt you to run a cappuccino rinsing
cycle. The prompt appears on the display (see Chapter 9.2
Cappuccino rinsing cycle).
You can change the amount of milk set while the machine is
dispensing milk. To do so, turn the Rotary Switch (B) until
the display indicates the required SEC.
We recommend running the cappuccino cleaning cycle daily
if you make cappuccino or frothed milk (see Chapter 9.3
Cappuccino cleaning cycle).
11. Making hot water
COFFEE READY
Place 1 cup or 1 glass under the height-adjustable hot water
spout (12) and press the Hot Water key .
HOT WATER
PORTION
The machine stops dispensing water automatically as soon as the
programmed amount of water has been dispensed.
COFFEE READY
To stop the machine dispensing hot water prematurely, press
any of the product keys.