Jura Capresso Z5 Coffeemaker User Manual


 
18
Switch the IMPRESSA off with the ON / OFF switch (A).
GOODBYE
The coffee spout is rinsing.
RINSE LEFT SPOUT
PRESS BUTTON
Press the maintenance key (C) to continue rinsing.
GOODBYE
When switching the machine off, there may be a hissing
sound. This is due to a normal process being performed by
the system.
It is recommended to switch off the machine with the power
switch if you intend not to use your IMPRESSA for a longer
time.
14. Settings
14.1 Setting the amount of water for coffee,
espresso (1 and 2 cups) and special coffee
The system’s basic settings include pre-defined amounts of water
(coffee 130 ml, espresso 60 ml, 2 coffees 260 ml, 2 espressos
120 ml, special coffee 145 ml). However, these can be modified as
required.
COFFEE READY
Place a cup under the respective coffee spout (17).
Press the product key to be programmed and hold it down until
the following message appears:
1 COFFEE (example)
NORMAL (example)
The coffee will be brewed. Keep on holding the key down until
the following message is displayed:
ENOUGH ?
PRESS BUTTON
When you have made as much coffee as you wanted, briefly
press the key once more.
CONFIRMED
The amount of coffee made has now been programmed for the
selected type of coffee.
COFFEE READY
14.2 Cappuccino setting
The system’s basic settings include pre-defined amounts of water
(100 ml) and milk (15 sec.). However, these amounts can be
modified as required.
COFFEE READY
Place a cup under the cappuccino nozzle (4).
Press the Cappuccino key and hold it down until the follow-
ing message appears:
CAPPUCCINO
NORMAL (example)
The cappuccino will be brewed. Keep on holding the key
down until the following message is displayed:
ENOUGH MILK
PRESS BUTTON