Jura Capresso Z5 Coffeemaker User Manual


 
19
When the machine has dispensed as much milk as you wanted,
briefly press the key once more.
CONFIRMED
The amount of milk to be dispensed is now programmed.
ENOUGH ?
PRESS BUTTON
When you have made as much coffee as you wanted, briefly
press the key once more.
CONFIRMED
The amount of coffee to be made is now programmed.
You can also make the cappuccino settings in the program-
ming mode (see Chapter 15.6)
14.3 Milk setting
The system’s basic settings include a pre-defined amount of milk
(20 sec.). However, this amount can be modified as required.
COFFEE READY
Place a cup under the cappuccino nozzle (4).
Press the Milk key and hold it down until the following mes-
sage appears:
MILK
20 SEC (example)
The milk will be dispensed. Keep on holding the key down
until the following message is displayed:
ENOUGH MILK
PRESS BUTTON
When the machine has dispensed as much milk as you wanted,
briefly press the key once more.
CONFIRMED
The amount of milk to be used is now programmed.
You can also set the amount of milk in the programming
mode (see Chapter 15.7)
14.4 Setting the amount of hot water
The system’s basic settings include a pre-defined amount of water
(225 ml). However, this amount can be modified as required.
COFFEE READY
Place a cup under the hot water spout (12).
Press the Hot Water key and hold it down until the following
message appears:
HOT WATER
PORTION
Machine dispenses hot water. Keep on holding the key down
until the following message is displayed:
ENOUGH WATER
PRESS BUTTON
When the machine has dispensed as much hot water as you
wanted, briefly press the key once more.
CONFIRMED
The amount of water to be dispensed is now programmed.
E