Filter
Top Products
15
Ⅲ Place the grounds bin and the tray back into the machine.
COFFEE READY
16.12 Cleaning the dual spout
Once started, the cleaning process must not be interrupted. It takes
approx. 20 minutes.
COFFEE READY
CLEAN
After having dispensed 220 products or after 80 rinsing
cycles, the machine must be cleaned. The machine will still
make coffee or hot water/steam. However, we recommend
that you run a cleaning cycle within the same day. After
having made another 20 coffees the cleaning alarm flashes,
and after yet another 20 coffees, the display will indicate the
following message:
CLEAN NOW
Ⅲ Open the programming door (Fig. 4) and press Clean Dual Spout
(Fig. 5/J) until you hear an acoustic signal.
EMPTY
TRAY
EMPTY
COFFEE
BIN
Ⅲ Remove the tray and the grounds bin and EMPTY the coffee
grounds.
COFFEE BIN
MISSING
Ⅲ Place the grounds bin and the tray back into the machine.
CLEANER FOR
PRESS
KEY
Ⅲ Place a sufficiently large receptacle under the height-adjustable
dual spout (Fig. 6).
Ⅲ Fill a receptacle with approx. 4 dl of water and add 1 1/2 capfuls
of JURA cappuccino cleaning agent. Dip the two milk hoses into
the solution (Fig. 8/B).
Ⅲ Press the Clean Dual Spout key (Fig. 5/J).
MACHINE CLEA
Ⅲ You will hear an acoustic signal.
ADD TABLET
PRESS
KEY
Ⅲ Drop an original JURA cleaning tablet into the filler funnel
(Fig. 16).
Ⅲ Press the Clean Dual Spout key (Fig. 5/J).
MACHINE CLEA
Ⅲ You will hear an acoustic signal.
WATER FOR C
PRESS
KEY
Fill a receptacle with approx. 0.4 litres of fresh water and dip
the milk hoses into it (Fig. 8).
Ⅲ Press the Clean Dual Spout key (Fig. 5/J).
MACHINE CLEA
Ⅲ You will hear an acoustic signal.
EMPTY
TRAY
EMPTY
COFFEE
BIN
Ⅲ Remove the tray and the grounds bin and EMPTY the coffee
grounds.
COFFEE BIN
MISSING
Ⅲ Place the grounds bin and the tray back into the machine.
COFFEE READY
16.13 Changing the filter
After 50 litres of water, the CLARIS plus filter cartridge will
need to be replaced. If the capacity exceeds 5%, a message
on the display will prompt you to change the filter. If it
exceeds 10%, the display will read CHANGE NOW
COFFEE READY
CHANGE
FILTER
Ⅲ Open the programming door (Fig. 4) and press the Filter key
(Fig. 5/B).
INSERT FILTE
PRESS
WATER
Ⅲ EMPTY the water tank and insert the filter cartridge in the tank
together with the cartridge holder, applying gentle pressure. Push
the cartridge holder into position until it engages audibly (Fig.
17).
Ⅲ Fill the water tank with cold, fresh tap water and reinstall it in
the machine.
Ⅲ Place a sufficiently large receptacle under the pivoting hot water
spout (U).
Ⅲ Press the Hot Water key (T / ).
FILTER RINSE
Ⅲ The flow of water stops automatically.
COFFEE READY
The water might be slightly discoloured (no hazard to
health).
16.14 Decalcifying
Once started, the decalcifying program must not be interrupted. It
takes approx. 40 minutes.
When using acidic decalcifying agents, immediately remove
any splashes or drops from sensitive surfaces, in particular
surfaces made of natural stone or wood, or take appropriate
preventive measures.
COFFEE READY
DESCALE
We recommend that you decalcify the machine within the
same day. If you make more coffees, the display will indicate
DECALCIFY. After yet even more coffees made, the display
will read DECALCIFY NOW.
Ⅲ Open the programming door on the front (Fig. 4) and press the
Decalcify key (Fig. 5/C).
EMPTY
TRAY
E