Filter
Top Products
8
3.4 Adding coffee beans
You have the possilility of using two different types of coffee
beans.
Ⅲ Remove the cover from the bean container (Fig. 3)
Ⅲ Clean out any dirt or foreign objects from the bean container.
Ⅲ Fill coffee beans into the bean container and replace the cover
again.
4. First use
Make sure to have filled the water tank and the bean tank.
Ⅲ Switch the IMPRESSA X9 on with the power switch on the rear
of the machine (Fig. 15/D).
Ⅲ Open the programming door on the front (Fig. 4) and switch the
IMPRESSA X9 on with the ON / OFF key (Fig. 5/A).
LANGUAGE
ENGLISH
Ⅲ Select a language of your choice by pressing the «+» or «–» key
(Fig. 5/F or L).
Ⅲ Press P to save your selection (Fig. 5/E).
CONFIRMED
TIME
HOURS
—:—
Ⅲ Set the hours by pressing the «+» or «–» key (Fig. 5/F or L).
Ⅲ Press P to save your setting (Fig. 5/E).
TIME
MINUTES
12:00
Ⅲ Set the minutes by pressing the «+» or «–» key (Fig. 5/F or L).
Ⅲ Press P to save your setting (Fig. 5/E).
CONFIRMED
WELCOME TO
PRESS RINSE
Ⅲ Press the Rinse key (Fig. 5/G).
SYSTEM FILLI
MACHINE HEAT
Ⅲ Place a cup under the height-adjustable dual spout (Fig. 6).
PRESS RINSE
Ⅲ Press the Rinse key (Fig. 5/G).
RINSING
When rinsing the machine, start with the coffee spout and
then move on to the two milk spouts.
5. Switching the machine on
Ⅲ Switch the IMPRESSA X9 on with the power switch on the rear
of the machine (Fig. 15/D).
Ⅲ Open the programming door on the front (Fig. 4) and switch the
IMPRESSA X9 on with the ON / OFF key (Fig. 5/A).
WELCOME TO
MACHINE HEAT
Ⅲ Place a cup under the height-adjustable dual spout (Fig. 6).
PRESS RINSE
Ⅲ Press the Rinse key (Fig. 5/G).
RINSING
When rinsing the machine, start with the coffee spout and
then move on to the two milk spouts.
6. Rinsing the machine
COFFEE READY
Ⅲ Press the Rinse key (Fig. 5/G).
RINSING
When rinsing the machine, start with the coffee spout and
then move on to the two milk spouts.
7. Setting the grinding degree
You can adjust the grinding gear to the roast of your coffee. We
recommend
a finer setting Ǟ (for a lighter roast)
a coarser setting Ǟ (for a darker roast)
Ⅲ To adjust the grinding degree, turn the setting rings to the
required position (Fig. 7).
Ⅲ You have the following options:
The smaller the dots, the finer the grind
The larger the dots, the coarser the grind
The grinding degree may only be adjusted while the grinding
gear is running.
8. Adjusting your machine to the water hardness
Water is heated in the machine. This leads to scale as a result of
use, which is automatically shown on the display. The machine
must be adjusted to match the hardness of the water used. For this,
please use the enclosed test stick.
1° German hardness is equivalent to 1.79° French hardness.
The machine can be adjusted from 1° German hardness up to 30°
German hardness. The function can also be deactivated.
The IMPRESSA X9 is preset to 16° German hardness. You can
adjust your machine to the local water hardness. Example:
COFFEE READY
Ⅲ Press P (Fig. 5/E) until you hear an acoustic signal.
HARDNESS
Ⅲ Press P again (Fig. 5/E) to activate the programming step.
Ⅲ Adjust the machine to the required water hardness by pressing
the «+» or «–» key.