Filter
Top Products
16
13.3 Rinsing the Professional Cappuccino Frother
Ⅲ Carefully pull off the Professional Cappuccino Frother from your
IMPRESSA.
Ⅲ Dismantle the Professional Cappuccino Frother (15) into its indi-
vidual parts (Fig. 16).
Ⅲ Thoroughly rinse all parts of the nozzle under running water.
Ⅲ Reassemble the Professional Cappuccino Frother (15) and refit it
on to your IMPRESSA.
13.4 Cleaning the Professional Cappuccino Frother
To ensure that the Professional Cappuccino Frother (15)
functions perfectly, you should clean it daily if you have pre-
pared milk foam or hot milk.
You will not be prompted by your IMPRESSA to clean the
Professional Cappuccino Frother (15).
You can obtain the JURA Auto-Cappuccino Cleaner from
the specialist shop.
Ⅲ Place a receptacle under the Professional Cappuccino Frother
(15) (Fig. 9).
Ⅲ Fill a second receptacle with 2.5 dl of fresh water and add one
capful of the Auto-Cappuccino Cleaner.
Ⅲ Dip the milk pipe into the second receptacle with the Auto-Cap-
puccino Cleaner (Fig. 9).
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(15) to the milk position (Fig. 21) or to the milk foam position
(Fig. 19).
Ⅲ READY
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Ⅲ Draw steam until the receptacle with the Auto-Cappuccino
Cleaner is empty.
This procedure cleans the Professional Cappuccino Frother and
the milk pipe.
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ READY
Before CLOSE TAP water may still escape the system.
Ⅲ Fill the receptacle with 2.5 dl of fresh water.
Dip the milk pipe into the receptacle with the fresh water.
Ⅲ Open the tap for dispensing steam/hot water (14) (Fig. 12) in or-
der to draw steam.
Ⅲ Draw steam until the receptacle with the fresh water is empty.
This procedure rinses the Professional Cappuccino Frother (15)
and the milk pipe with fresh water.
Ⅲ Cleaning of the Professional Cappuccino Frother (15) is now
complete, your IMPRESSA is ready for use.
14. Switching off the IMPRESSA
In order to ensure perfect operation, please don’t switch off
your IMPRESSA at the power switch (24) before all the
symbols on the display (9) have gone off except for (3).
Ⅲ READY
Ⅲ Switch off the IMPRESSA using the ON/OFF key (3).
Ⅲ RINSING
Ⅲ An automatic rinsing operation is started.
Ⅲ
Your IMPRESSA is in standby mode.