Filter
Top Products
23
If the water tank shows signs of scaling, remove the scaling
using a commercial de-scaling agent. Take out the water
tank (Fig. 4).
Remove the CLARIS plus filter cartridge, if installed, before
de-scaling the water tank.
16.9 Emptying the system
Precondition: IMPRESSA switched off
This operation is required to protect the IMPRESSA against
frost damage during transports.
Ⅲ Place a receptacle under the Professional Cappuccino Frother
(15) (Fig. 10).
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(15) to the steam position (Fig. 20).
Ⅲ OPEN TAP
Ⅲ Press the Rotary Switch (1)
Ⅲ EMPTYING
Ⅲ CLOSE TAP
Ⅲ The IMPRESSA is switched off.
17. Cleaning
Your IMPRESSA features an integrated cleaning program. The
cleaning operation will take some 15 min.
Original JURA cleaning tablets which are specially designed
for the cleaning program of your IMPRESSA are available at
your authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate cleaning agents.
Once started, the de-scaling operation must not be inter-
rupted!
After each cleaning operation the filler funnel for pre-ground
coffee should be cleaned (11).
Ⅲ READY
CLEAN
Ⅲ Touch the symbol (7).
Ⅲ EMPTY
TRAY
Ⅲ Empty the tray (20).
Ⅲ NO
TRAY
Ⅲ Insert the tray (20) again.
Ⅲ Remove the drip grate (19).
Ⅲ Put a container (1 l, Fig. 11) under the adjustable coffee spout
(17).
Ⅲ PRESS
MAINT.
Ⅲ Touch the symbol (7).
Ⅲ CLEANING
Ⅲ FILL
TABLET
Ⅲ Fill in the tablet (see Fig. 14)
Ⅲ PRESS
MAINT.
Ⅲ Touch the symbol (7).
Ⅲ CLEANING
Ⅲ EMPTY
TRAY
E