22 USK MW 26146 - 080425
Note: The heating element will go out 15 seconds before the end of
the cooking time.
3. Microwave + Steam
1. Press the "COMBI" button three times. On the display, “800” will
start flashing, which is the preset power level.
2. Press “POWER LEVEL” to select the power. You can choose
between 5 power levels: 800W, 550W, 400W, 250W and 100W.
3. Set the cooking time by turning the rotary knob (maximum 60
minutes).
4. Press the START button “ /30SEC” to start cooking. The
countdown begins.
Note: If there is not sufficient water in the water tank when using this
function, 8 beeps will sound. If you do not add water when that
happens, 4 beeps will sound every minute. See also section “STEAM
COOKING PRINCIPLES”.
4. Grill + Steam
1. Press the "COMBI" button four times. “: 0” appears on the display.
2. Set the cooking time by turning the rotary knob (maximum 60
minutes).
3. Press the START button “ /30SEC” to start cooking. The
countdown begins.
Note: The heating element will go out 15 seconds before the end of
the cooking time.
If there is not sufficient water in the water tank when using this
function, 8 beeps will sound. If you do not add water when that
happens, 4 beeps will sound every minute. See also section “STEAM
COOKING PRINCIPLES”.
5. Convection + Steam
1. Press the "COMBI" button five times. “440” appears on the display,
which is the maximum temperature for convection.