Filter
Top Products
13
Disassembling the Food
Processor Bowl
1. Remove Spindle 2 from the Food
Processor bowl.
2. With one hand holding the motor
base and the other holding the
handle of the Food Processor
bowl, turn the bowl clockwise
so that the ‘
ALIGN
’ symbol on the
Food Processor bowl is directly
above the ‘
ALIGN
’ symbol on
the motor base. Pull the Food
Processor bowl away from the
motor base to remove.
3. Remove Spindle 1 from the
motor base. The motor base
is now ready to assemble the
Blender jug.
Assembling the Blender
1. Place the motor base on a flat,
dry surface such as a bench top.
Make sure that the appliance is
switched off at the power outlet
and the power cord is unplugged
from the outlet.
2. Place the Blender jug onto the
motor base. Align the ‘
ALIGN
’ symbol
found on the lower edge of the
Blender jug with the ‘
ALIGN
’ symbol
found on the motor base. Turn the
Blender jug anti-clockwise until the
‘
ALIGN
’ symbol found on the Blender
jug meets the ‘
LOCK
’ symbol on the
motor base. Once aligned, the
Blender jug will be locked onto
the motor base and secure.
NOTE: The Blender will not
operate unless the Blender jug is
correctly positioned and locked
onto the motor base.
Operating the Blender
1. Ensure the control dial is in the
‘OFF’ position.
2. Insert the power plug into a 230V
or 240V power outlet and switch
the power on at the power outlet.
3. Place the ingredients to be
blended into the Blender jug.
NOTE: Do not overfill the Blender
jug above the 1500ml (MAX)
mark. Replace lid, turn power
on at the power outlet and
recommence blending.
4. To fit the Blender lid, place the lid
so that the spout cover is either
to the left or right of the jug spout
and the lid sits flat. Twist the lid
until the spout cover and jug
spout are aligned. Ensure that
the ‘filler cap’ in the centre of the
jug lid is also fitted correctly into
position. The blender is now ready
to use.
5. With one hand placed on top of
the blender lid, turn the control
dial from the ‘OFF’ position to
either the ‘LOW’ or ‘HIGH’ speed
setting depending on what the
recipe requires. The speed can
be changed at any time during
blending. For short bursts of power,
use the ‘PULSE’ speed setting.
6. If ingredients need to be added
during blending, remove the
‘filler cap’ and drop or pour
through the hole.
7. When blending is complete,
turn the control dial to the ‘OFF’
position, switch off at the power
out and unplug from the power
outlet. Wait until the blades have
fully stopped rotating before
removing the lid or jug.