Filter
Top Products
7
Before First Use
Before assembling your Kambrook
Bench Mixer, remove and safely
discard any packaging material
and promotional labels.
Ensure the Speed Control Dial is in
the ‘OFF’ position and the appliance
is switched off at the power outlet
and remove the power cord from
the outlet.
Wash the mixing bowl, splash guard,
leaf beater, dough hook and whisk
attachment in warm soapy water with
a soft cloth. Rinse and dry thoroughly.
The mixing bowl may also be washed
in the dishwasher.
NOTE: When first using your
Bench Mixer you may notice
an odour coming from the
motor. This is normal and will
dissipate with use.
Attaching the Mixing Bowl
1. Place one hand on top of the
Mixer Head and with the other
hand press and hold the ‘Tilt’
button to lift the Mixer Head up
until it stops (See Fig. 1). Release
the ‘Tilt’ button. The Mixer Head
will lock into the elevated position.
It is now easy to position the
mixing bowl.
Assembly and Operation of Your
Kambrook Bench Mixer
Fig. 1
2. Fit the bowl so that it aligns with
the grooves on the Mixer Stand
(See Fig. 2).
Fig. 2
3. To lock the mixing bowl, turn it
clockwise following the ‘
’
on the Mixer Stand. Make sure
that the mixing bowl is securely
locked in place.
Removing the Mixing Bowl
1. Place one hand on top of the
Mixer Head and with the other
hand press and hold the ‘Tilt’
button to lift the Mixer Head up
until it stops (See Fig. 1). Release
the ‘Tilt’ button. The Mixer Head
will lock into the elevated position.
2. Hold the mixing bowl and turn it
anti-clockwise and in the opposite
direction of the ‘
’ on the
Mixer Stand. Then lift the mixing
bowl and pull it away from the
Mixer Stand.