Filter
Top Products
8
2. Align the chosen attachment so
that grooves on the attachment
align with the Attachment Shaft
located under the Mixer Head.
With some pressure, push the
attachment towards the Mixer
Head, lifting the Attachment
Shaft spring upwards and twist
the attachment in an anti-
clockwise direction. Make sure
that the attachment is securely
locked in place.
NOTE: It is important that the
leaf beater, dough hook or whisk
attachment is securely locked
into place on the Attachment
Shaft or your Bench Mixer will not
operate correctly.
Removing the Leaf Beater/
Dough Hook/Whisk
Attachment
1. Place one hand on top of the
Mixer Head and with the other
hand press and hold the ‘Tilt’
button to lift the Mixer Head up
until it stops (See Fig. 1). Release
the ‘Tilt’ button. The Mixer Head
will lock into the elevated position.
2. Hold onto the assembled
attachment. With some pressure,
push the attachment towards the
Mixer Head, lifting the Attachment
Shaft spring upwards and twist
the attachment in a clockwise
direction. Pull the attachment
away from the Attachment Shaft
to remove it from the Mixer Head.
Assembly and Operation of Your
Kambrook Bench Mixer continued
Attaching the Splash Guard
1. Place one hand on top of the
Mixer Head and with the other
hand press and hold the ‘Tilt’
button to lift the Mixer Head up
until it stops (See Fig. 1). Release
the ‘Tilt’ button. The Mixer Head
will lock into the elevated position.
2. Place the splash guard under
the Mixer Head. Align the‘
’
on the Mixer Head with the‘
’on
the splash guard. Turn the splash
guard clockwise so that the‘
’
on the Mixer Head aligns with
the‘
’on the splash guard. Make
sure the splash guard is securely
locked in place.
NOTE: We recommend to always
use the splash guard to avoid
splatter coming out of the mixing
bowl. The opening on the splash
guard can be used to add quick
incorporations, such as chocolate
chips to cookie mixes or fruit and
nuts to bread doughs.
Inserting the Leaf Beater/
Dough Hook/Whisk
Attachment
1. Place one hand on top of the
Mixer Head and with the other
hand press and hold the ‘Tilt’
button to lift the Mixer Head up
until it stops (See Fig. 1).
Release the ‘Tilt’ button. The
Mixer Head will lock into the
elevated position.