Filter
Top Products
TROUBLE SHOOTING CHART
VI PARTS LIST
ORDERING PARTS
Parts may be ordered by part number by calling
Keating at 1-800-KEATING or your service company.
You may also order on-line at Keating’s part store,
www.keatingofchicago.com
Refer to the Keating MIRACLEAN® Griddle Limited
Warranty for complete service and ordering
information.
The model/serial plate is located on the front of the
control panel. The serial and model numbers are
necessary information when ordering.
WARNING AND
OPERATING PLATES
All warning and operating plates on the Keating
MIRACLEAN® Griddle should be in place at all times.
If plates are damaged or lost, replace them
immediately.
Figure 6-1 MIRACLEAN Griddle Assembly
ITEM DESCRIPTION PART NUMBER
1 GREASE DRAWER ASSEMBLY
24” DEEP GRIDDLES 004013
30”, 33”, AND 36” DEEP GRIDDLES 002446
2 CABINET REFERENCE ONLY
3 PLATE AND PERIMETER CALL 1-800-KEATING
4 CONTROL PANELASSEMBLY SEE PAGE 9
5 HEAT SHIELD CALL 1-800-KEATING
6 BURNER INSERT SEE PAGE 9
7 GREASE DRAWER FRONT WITH HANDLE 002446
8 GREASE DRAWER HANDLE 004542
8
PROBLEM PROBABLE CAUSE SOLUTION
No pilot a. Gas supply not “ON”. a. Open gas supply valve.
b. Air in gas lines. b. Press gas valve knob in “pilot” position
and hold.
c. Quick disconnect not tight. c. Tighten quick disconnect.
d. Gas valve is in “OFF” position. d. Turn valve knob to “pilot”.
e. Faulty Piezo Ignitor. e. Replace ignitor.
Pilot won’t stay on a. Loose thermopile. a. Tighten fitting and/or terminal leads.
b. Faulty thermopile. b. Replace thermopile.
Pilot on but no main a. ON/OFF switch is in “OFF” a. Put ON/OFF switch to “ON” position.
burner ignition position.
b. Gas valve is in “pilot” position. b. Turn knob to “ON” position.
c. Thermostat is not on. c. Turn thermostat to desired temperature.
d. Thermostat failure. d. Replace thermostat.
e. Gas valve failure. e. Replace valve.
Temperature of a. Thermostat is not calibrated. a. Calibrate thermostat.
griddle erratic b. Air from exhaust hood b. Have exhaust hood inspected.
excessive.
c. Improper cooking procedure. c. See ‘Cooking’, page 5.
Griddle stays hot or a. Thermostat is not calibrated. a. Calibrate thermostat.
overheats b. Thermostat failure. b. Replace thermostat.
c. Gas valve faulty. c. Replace gas valve.
d. Improper cooking procedure. d. See ‘Cooking’, page 5.