Filter
Top Products
NOTE: Damage done to the MIRACLEAN® surface is
irreparable.
CLEANING THE
GRIDDLE
The surface of the MIRACLEAN® Griddle is very
durable and with proper care, following the procedures
below, will last many years.
A sample of Keating Klenzer, Keating palmetto brush
and a 4” scraper are included with each new griddle.
1. Scrape MIRACLEAN®
surface.
2. Clean with potable tap water
and a Keating palmetto
brush.
3. Polish surface with
Keating Klenzer and a
soft cloth (towel).
Rinse with potable
water to remove
excess Keating
Klenzer.
WARNING
BECAUSE OF THE SUPERIOR MIRACLEAN®
SURFACE, THE ONLY TOOLS YOU WILL EVER
NEED TO CLEAN THE GRIDDLE ARE A NATURAL
BRISTLE BRUSH AND A KEATING SCRAPER.
NEVER USE GRIDDLE STONES, GRIDDLE
BRICKS, GRIDDLE SCREEN OR HARSH
CHEMICALS TO CLEAN THE MIRACLEAN®
SURFACE.
DAMAGE DONE TO THE MIRACLEAN®
SURFACE BY GRIDDLE STONE, GRIDDLE
BRICK, GRIDDLE SCREEN OR HARSH
CHEMICALS WILL VOID THE WARRANTY.
THE DAMAGE DONE TO THE MIRACLEAN®
SURFACE IS IRREPARABLE.
NEVER USE ICE TO COOL THE MIRACLEAN®
SURFACE. USE OF ICE MAY WARP THE
MIRACLEAN® SURFACE.
USE ONLY KEATING SUPPLIED CLEANING
TOOLS AND KLENZER.
USE ONLY A KEATING STEEL SPATULA.
DO NOT CLEAN SCRAPER ON SPLASHBACK,
GREASE BUILD-UP WILL OCCUR WHICH MAY
RESULT IN A FIRE.
DO NOT STORE ANYTHING IN OR ON THE FLUE
OF THE MIRACLEAN®.
SHUTDOWN
1. Turn ON/OFF switch to “OFF” position.
2. Turn gas valve knob to “OFF” position.
3. Check to determine that all burners, including pilot
light, are extinguished.
4. If you must restart your MIRACLEAN®, wait five
minutes before restarting or relighting with piezo
spark ignitor or a match.
IV MAINTENANCE
WARRANTY REPAIRS
Keating’s warranty begins with the date of installation.
In the event that your MIRACLEAN® Griddle, under
warranty, needs repairs other than routine
maintenance or cleaning, you are requested to contact
your local service distributor.
PREVENTIVE
MAINTENANCE
Preventive maintenance should be done in daily,
weekly, monthly and yearly intervals as necessary.
Following preventive maintenance procedures will help
keep your MIRACLEAN® working efficiently. Proper
care and servicing will lead to years of quality
performance.
PREVENTIVE MAINTENANCE CHART
6
*High production facilities should be checked more often.
TIME FRAME OPERATOR/OWNER SECTION
Daily
Clean griddle surface. III
Drain and clean grease drawer.
Completely wipe down griddle
cabinet.
Monthly* Check MIRACLEAN® surface III
to insure proper maintenance.
(Review proper cooking procedures)
Check calibration of IV
thermostat(s).
Review operating instructions II
received with griddle.
Yearly* QUALIFIED SERVICE PERSONNEL ONLY
Have griddle completely checked, calibrated, tested,
cleaned, etc. by qualified service personnel. Be sure to check
color and height of pilot flame.