Filter
Top Products
10
Setting Oven Lockout Feature
The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents the
oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The ovens can be locked
individually.
for 3 seconds
for 3 seconds
To activate the Oven Lockout feature
1. Press .
2. Press and hold
for 3 seconds.
3. After 3 seconds, "DOOR", "LOCKED" will ash and "Loc", and
"UPPER" will appear in the display (Fig. 1). Once the oven door
is locked the "DOOR" and "LOCKED" indicator will stop ashing
and remain in the display. Allow 15 seconds for the oven door to
lock.
To reactivate normal oven operation:
1. Press .
2. Press and hold
for 3 seconds. "UPPER" and "LOC" will
disappear from the display. "DOOR" and "LOCKED" will ash in
the display until the oven door has completely unlocked.
3. The wall oven is again fully operational.
Note: Because you can set the oven lockout individually, the lower oven
can be used when the upper oven lockout feature is on.
Consumer Dened Control
Note: The Consumer Dened Control features are adjustments to the control that will not aect cooking results. These include
the Oven Lockout, Temperature Display and Silent Control Operation features.
Fig. 1
Setting Silent Control Operation
The and pads control the Silent Control operation feature. The Silent Control operation feature allows the oven
control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent
operation and later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control
operation
1. Press and hold for 7 seconds (Fig. 2). After 6 seconds,
"bEEP" (On) will appear in the display (Fig. 3).
2. Press
to switch between normal sound operation (Fig. 3) and
silent operation mode (Fig. 4).
3. Press
to accept the change or press to reject the
change.
Note: The control will always beep at the end of a kitchen timer
and will beep when a set temperature has been reached, even if the
control is set to silent operation.
for 7 seconds
or
Fig. 2
Fig. 3
Fig. 4
INSTRUCTIONS PRESS DISPLAY
INSTRUCTIONS PRESS DISPLAY