Filter
Top Products
The oven will automatically shut off once it senses it is clean. The
door will not unlock unbl the oven cools.
Once the oven has completely cooled remove ash w_th a damp
cloth, Do not wipe down any of the inside surfaces until the oven
has completely cooled down. Applying a cool. damp cloth to the
inner door glass before it has cooled completely could result in
the glass breaking
The soil level can be manually set to light, average or heavy soil
levels by repeatedly pressing SENS-A-CLEAN
To Start Self-Clean:
Before self-cleaning, make sure the door is closed completely or
it will not lock and the cycle will not begin.
1. Press SENS-A-CLEAh
The SEnS setting will automatically determine the length of
cleaning time
2. Press START ENTER.
The oven door will lock in 6 seconds and "CLN SENS.
HEAT." "ON " "LOCKED." and CLEAN" will aePear on the
alsplay The door will not unlock until the oven cools. The
cycle time includes a 30 minute cool down time
When the cycle is complete and the oven cools "End" will
appear on the display and "LOCKED" will d_sappear.
3. Press OFF/CANCEL or open tne aoor [o remove "End" frorr
the display
4. Close aoor.
The time of day will appear on the display.
To Delay Start Self-Clean:
Before delay s[amng Self-Clean make sure the clock is set to the
correct time of day, See "Clock" section Also make sure the
door is closed completely or it will not lock and the cycle will no[
Begin,
1, Press SENS-A-CLEAN
The SEnS setting will automatically determine the length of
cleaning time
If desired set the aDeroriate soil level by repeatedly pressing
the SENS-A-CLEAN Dan,
To Step Self-Clean any time:
Press OFF!CANCEL, and "cln." "ON," "cool," ano "LOCKED" wil
appear on the display until the oven cools. Then "End" will
appear and the door will unlock
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions
on cleaning products.
Soap water and a soft cloth or sponge are suggested first unless
otherwise noted
EXTERIOR PORCELAIN ENAMEL SURFACES
Ion some models)
Fooa soills containing acids, such as vinegar ana tomato shoulc
be cleaned as soon as [he entire appliance is cool, These SPillS
may affect the finish
• Glass cleanen mild liquid cleaner or non-abrasive scrubbing
Dad:
Gently clean around the model and serial number elate
Decause scrUDDIng may remove numbers
PORCELAIN-COATED GRATES AND CAPS
Fooa soills containing ac=as, such as vinegar and tomato shoulc
be cleaned as soon as the cooktop, grates and caos are cool
these SDilISmay affect the finish,
To avoid chiDeing, do not bang grates ano caps against each
other or hard surfaces such as cast iron cookware.
Do no[ reassemble caos on burners while wet,
Do not clean in the Self-Cleaning cycle
• Non-abrasive plastic scrubbing pad and mildly abrasive
cleanser:
Clean as soon as cooktoD, grates and caps are coo
• Dishwasher (grates only, not capsf
Use the most aggresswe cycle.
2. Press DELAY START,
Press HOUR/MIN "up" or "down" arrow pads to set the ume
of clay to start the Self-Cleaning cycle.
3. Press START ENTER.
The door will automatically lock and "LOCKED "DELAY"
and the time of day will appear on the display.
When the start time is reached the oven will automatically
[urn on
SURFACE BURNERS
Sealed Burner models
See "Sealed Surface Burners" section
COOKTOP CONTROLS
Do not use steel wool abrasive cleansers or oven cleaner.
When the cycle _scomplete and the oven cools "End" will Do not Soak knobs
appear on the diSDlay and "LOCKED" will disappear. When replacing knobs make sure knobs are in the OFF position.
4. Press OFF/CANCEL or open the aoor [o remove "End" from On some models do not remove seals under knobs.
the d_selay • Soao and water or dishwasher:
5. Close ooor. Pull knobs straight away from control aanel [o remove.
The time of day will appear on the display.
To Manually Set Soil Level:
• Press twice for light soils and "SoilL" will appear on the
o_splay.
• Press three times for average soils and "SoilA" will appear
on the display
• Press four times for heavy soils, and "SoilH" will appear on
the display
CONTROLPANEL
Do not use abrasive cleaners steel-wOOl 3ads. gritty wash cloths
or some paper towels. Damage may occur
• Glass cleaner and soft cloth or sponge:
ADDly glass cleaner to soft cloth or sponge, not directly on
panel
The oven light will not work during the Self-Cleaning cycle.
2O