Kenmore 665.95824 Range User Manual


 
USING THE SURFACE COOKING ZONES (contd.)
Use the STEADYTEMP warming zone to keep
cooked foods warm. It is not recommended for
heating cold foods. Choose the MIN setting for
heat-sensitive and smaller quantities of food.
Choose the MAX setting for liquids and larger
quantities of food. Adjust as needed.
TO set the STEADYTEMP warming zone:
1. Push in and turn the control knob to the desired
setting from MIN to MAX for different levels of
heating.
2. Turn the knob to OFF when finished. The
STEADYTEMP warming zone will remain warm
until the hot surface indicator light on the
control panel goes off.
Cover all foods with a lid or aluminum foil. Do not
use plastic wrap to cover food because it may
melt onto the cooktop surface. When warming
baked goods, allow a small opening in the cover
for moisture to escape.
Use only cookware and dishes recommended for
oven and cooktop use.
Use potholders or oven mitts to remove cookware.
The STEADYTEMP warming zone will not glow
red when it is on, unlike the surface cooking
zones. However, the surface indicator light on the
control panel will glow.
Cookware and dishes should have a flat bottom
to make direct contact with the cooktop surface.
STEADY'FEMP
control knob
EASYGLANCE TM hot
surface indicator lights
...... _ 8_
COOKTOP ON indicator light
STEADYTEMP warming zone
The STEADYTEMP warming zone may be used
whether the other surface cooking zones are in use
or not.
Food quality may deteriorate if it is kept on the
STEADYTEMP warming zone for an extended
period of time.
For best results, hold food no longer than 30 to
45 minutes.
The hot surface indicator light above the control
knob will glow when the cooking zone controlled
by that knob becomes too hot to touch. The
indicator light will continue to glow as long as the
cooking zone is too hot to touch, even after the
surface cooking zone is turned off.
8o_ Hot surface
indicator light
ON
The COOKTOP ON indicator light on the right of
the control panel will glow when any surface
control knob is turned on.
The indicator light will go off when all control knobs
have been turned off, even when one or more
cooking zones are still hot.
®@
COOKTOP ON indicator light
9