Filter
Top Products
Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, a[[ functions
are the same, Also, push buttons or pads may be shaped differently than those appearing in this Use and
Care Guide,
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
OVEN CLOCK SET COOKT[ME UP and DOWN ARROWS PADS Used
INTERIOR PAD Used to PAD Used to along with the function pads to select
LIGHT PAD set the time enter the length oven temperature, cook time, start time
Used to turn of day. of the baking (when programming an automatic start
interior light "_ time. \ time), time of day, clean time and
oven
%
minute timer.
ON and OFF__ _'\ X
T,OERSET, \ \
Used to set or cancel _ _. _.
the minute timer. The \ \. \ @
minutet merdoesno
startorstop t LtJ / t 1
Also, TIMER SET/OFF _,_.,/ _
Pad is used to set the
Continuous Bake @ @
Feature.
SELECT CLEAN
HAKEPAD-- FEATURE
Used to select INDICATOR
the bake LIGHTS-- These
function, light to show which
feature is in use.
/
Z
4}
BROIL PAD--
Used to select
the variable broil
function.
PAD (some models}
Used to select the
Self-Cleaning cycle.
A 2, 3 or 4 hour Self-
Clean time may be
selected (some
models).
DELAY START PAD Used to set the
desired start time for baking. May be
used with COOK TIME to program a
delayed bake cycle or a delayed clean
cycle.
@ Ove_ 89
Preheat
DeerLocke4
, PREHEAT & DOOR LOCK (some models)
UGNTS* The "Oven" light will glow each time the oven
unit turns on to maintain the set oven temperature. The
"Preheat" light will glow when the oven is first set to
operate, or if the desired temperature is reset higher than
the actual oven temperature. The "Door Locked" light will
flash until the door locks when the self-clean cycle is in use.
It glows constantly after the door locks (some models).
@
WARM & HOLD
PAD-- Used to
set the Warm &
Hold feature.
STOP CLEAR PAD-- Used to
clear any function previously
entered except the time of day ......:
and minute timer. Press STOP
CLEAR to stop cooking. Also the
STOP CLEAR pad is used to
activate oven lockout setting.
(some models).
*Note: The OVEN indicator light on the electronic display wi[[ turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature.
When preheat indicator light turns OFF, your oven is ready.
For a silent control paneh
When choosing a function, a beep wi[[ be heard each time a pad is pressed, If desired, the control can be programmed
for silent operation.
1. To te[[ if your oven is set for normal or silent operation press and hold _ for 7 seconds, "- - "or "SP" (speaker)
2. Within 5 seconds, press the A or v pad to switch between normal sound operation and silent operation mode.
The display wi[[ show either "- - " or "SP".
3. Wait 5 seconds to return to normal operating mode.
If "SP" appears, the control wi[[ operate with normal sounds and beeps. If "o o " appears, the control is in the silent
operation mode.
Temperature Conversion (Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory, The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press and hold , for 7 seconds until °F or °C appears in the display.
2. Press the A or v pad to change °F to °C or °C to °F.
3. Wait 5 seconds to accept the changes or press i to reject the changes.