Kenmore 790. 4788 Oven User Manual


 
Self-Cleaning
What to Expect during Cleaning
While the oven is inoperation, the oven heats to temperatures much higher than
those used in normal cooking. Sounds of metal expansion and contraction are
normal. Odor is also normal as the food soil is being removed. Smoke may appear
through the oven vent.
If heavy spillovers are not wiped up before cleaning, they may flame and cause
more smoke and odor than usual. This is normal and safe and should not cause
alarm. If available, use an exhaust fan during the self-cleaning cycle.
Self-Clean Cycle Time Length
The FLEX CLEAN _ pad controls the Self-Cleaning feature. Ifyou
are
planning
to use the oven directly after a self-clean cycle remember to allow time for the oven
to cool down and the oven door to unlock. This normally takes about one hour. So a
3 hour self-clean cycle will actually take about 4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for
average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).
INSTRUCTIONS PRESS
To avoid possible
burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the oven
when opening the door to allow hot
air or steam to escape.
DO NOT force the
oven door open. This can damage
the automatic door locking system.
Use caution and avoid possible
burns when opening the door after
the Self-Cleaning cycle has
completed. The oven may still be
VERY HOT.
DISPLAY
To set the controls for a 3 hour Self-Cleaning cycle
to start immediately and shut off automaticaly
1. Be sure the clock isset with the correct time of day and the oven
door is closed.
2. Press _. "CLEAN" will flash and "3:00" HR will show in the
display (Figure 1). The control will automatically clean for a 3 hour
period (default self-cleaning cycle time). Note: If a 2 or 4 hour
clean time is desired, press (_ @ @ for 2 hour
or
press
_'_ _ _ for a 4 hour clean time. Set the cleaning time
based on the amount of soil: light, medium or heavy (* See above).
3. Press :::ISTART:;. The "DOOR LOCKED" icon will flash; "CLEAN"
icon and the letters "CLn" will remain on in the display
(Figure 2).
4. As soon as the control is set, the motor driven oven door lock will
begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will stop flashing and remain on.
Also, the oven icon will appear in the display (Figure 3).
Note: Allow about 15 seconds for the oven door lock to close.
@
@@or
....i
Figure 1
Figure 2
Figure 3
When the Self-Clean Cycle is Completed
1. "END" will appear in the display. The time of day, the "DOOR
LOCKED" and "CLEAN" icon will remain in the display (Figure 4).
2. Once the oven has cooled down for approximately 1 HOU R, and
the "DOOR LOCKED" iconis no longer displayed, the oven door
can then be opened (Figure 5).
Stopping or Interrupting a Self-Cleaning Cycle
if it becomes necessary to stop or interrupt a self-cleaning cycle due
to excessive smoke or fire in the oven:
1. Press Q.
2. The oven door can only be opened after the oven has cooled down
for approximately 1 HOUR and the "DOOR LOCKED" icon is no
longer displayed (Figure 5).
27
@
Figure 4
Figure 5