Filter
Top Products
6
Removing the Soil Settler Assembly
1. Disconnect the dishwasher from the household electrical system and lay the unit on its back.
2. Remove the four (4) Hex-head screws securing the soil settler assembly to the tub.
3. Disconnect the two (2) hoses from the soil settler collector.
4. Remove the funnel and funnel grate, check valve ball and seal from the soil settler collector.
(Fig. 1-11)
FUNNEL GRATE
FUNNEL
CHECK VALVE BALL
SEAL
CLAMPS
HOSE
Fig. 1-11
Removing the Heater Element
1. Disconnect the dishwasher from the household electrical system.
2. Disconnect the wiring harness connectors from the heater element terminals with a pair of
needlenose pliers.
3. Remove the two long Hex-head nuts securing the heater element to the tub.
(Fig. 1-12)
4. Remove the heater element from the three (3) metal clips that hold it suspended inside the tub.
(Fig. 1-13)
HEATER
ELEMENT
RETAINING
NUTS
HEATER
ELEMENT
Fig. 1-12 Fig. 1-13