Filter
Top Products
4
Removing the Spray Arm Assembly
1. Disconnect the dishwasher from the house-
hold electrical system.
2. Open the dishwasher door and remove the
lower rack.
3. Use an adjustable slip-nut wrench and loosen
the pump outlet nut. (Fig. 1-4)
4. Lift the spray arm assembly out of the pump fitting.
5. The spray arm can be disassembled by removing
the retaining screw from the spray arm and removing the split-ring seal, the pump outlet nut
and the support and bearing assembly. (Fig. 1-5)
Fig. 1-4
Fig. 1-5
SPRAY ARM ASSEMBLY
SPLIT RING SEAL
PUMP OUTLET NUT
SUPPORT & BEARING
RETAINING SCREW
Removing the Pump and Motor Assembly
1. Disconnect the dishwasher from the household electrical system.
2. Lay the dishwasher on its back and disconnect the wiring harness connector from the motor.
3. Remove the motor support slip nut and remove the motor support.
(Fig. 1-6)
MOTOR SUPPORT
SUPPORT
SPLIT NUT
Fig. 1-6