Kenwood CP706 Slow Cooker User Manual


 
before using for the first time
Wash the parts see ‘care and
cleaning’
key
lid
cooking pot
base unit
handles
control knob (CP706)
indicator light (CP706)
Model CP707
display screen
high setting button (High)
low setting button (Low)
keep warm setting button (Warm)
timer increase button
ON/OFF button
timer decrease button
using your manual slow
cooker (CP706)
1 Follow the recipe and place the
ingredients into the cooking pot.
2 Place the cooking pot into the base
unit. Important - to avoid
being burnt when removing
the cooking pot, ensure it is
placed into the base unit as
shown in the illustrations ,
with the handles on the
cooking pot in line with the
handles on the base unit.
3 Place the lid in position and plug
the slow cooker into the power
supply.
4 Select the desired setting ie high,
low or keep warm. The indicator
light will come on and cooking will
begin.
5 Allow to cook for the desired time.
6 After cooking, switch off and unplug
the slow cooker.
using your electronic
slow cooker (CP707)
1 Follow the recipe and place the
ingredients into the cooking pot.
2 Place the cooking pot into the base
unit. Important - to avoid
being burnt when removing
the cooking pot, ensure it is
placed into the base unit as
shown in the illustrations ,
with the handles on the
cooking pot in line with the
handles on the base unit.
3Place the lid in position.
4 Plug the slow cooker into the power
supply.
5Press the ON/OFF button to turn
the slow cooker on. The display will
read 0:00 and the screen will
illuminate. The screen illumination
will turn off if no buttons are
pressed within 30 seconds.
6 Select the desired cooking mode by
pressing the high, low or keep
warm setting button. An icon will
appear on the right of the screen
and a dash will appear next to the
selected cooking mode. Cooking
will begin, indicated by the decimals
flashing.
7 Allow to cook for the desired time.
8Press the ON/OFF button once to
stop cooking. Hold the ON/OFF
button down for 5 seconds to turn
the slow cooker off. Unplug the
slow cooker after use.
setting the timer
(CP707
only)
1 Follow steps 1-5 above.
2 Set the desired cooking time by
pressing the timer increase (+) or
timer decrease (-) buttons. The
timer can be set in 30 minute
increments up to a maximum of 10
hours for low and high settings but
will default to a maximum of 2
hours for the keep warm setting.
3