Filter
Top Products
safety
●
N
ever remove the lid until the cutting disc has
completely stopped.
●
H
andle the cutting discs with care - they are
e
xtremely sharp.
●
Do not overfill the bowl – do not exceed the
m
aximum capacity level marked on the bowl.
to use the cutting discs
1
Fit the bowl onto the power unit, add the detachable drive shaft
2
.
2 Holding by the centre grip, place the disc onto the drive shaft with
t
he appropriate side uppermost
bk
.
3 Fit the lid.
4 Put the food in the feed tube.
Choose which size feed tube you want to use. The pusher
contains a smaller feed tube for processing individual items or
thin ingredients.
To use the small feed tube - first put the large pusher inside the
feed tube.
To use the large feed tube - use both pushers together.
5 Switch on and push down evenly with the pusher - never put
your fingers in the feed tube.
hints
●
Use fresh ingredients
●
Don’t cut food too small. Fill the width of the feed tube fairly full.
This prevents the food from slipping sideways during processing.
Alternatively use the small feed tube.
●
When using the Julienne disc, place ingredients horizontally.
●
When slicing or grating: food placed upright
bl
comes out
shorter than food placed horizontally
bm
.
●
Food placed upright comes out shorter than food placed
horizontal.
●
There will always be a small amount of waste on the disc or in
the bowl after processing.
cr
mini bowl and knife
Use the mini processor bowl to chop herbs and process small
quantities of ingredients e.g. meat, onion, nuts, mayonnaise,
vegetables, purées, sauces and baby food.
The slicing/grating discs can also be used with the mini bowl.
Insert the mini bowl without the knife blade fitted and refer to the
slicing/grating disc section for fitting and usage instructions.
Do not overfill the bowl.
mini blade
mini bowl
to use the mini bowl and knife
1 Fit the bowl onto the power unit, add the detachable drive shaft.
2 Fit the mini bowl over the detachable drive shaft - ensure the cut
out sections align with the locating tabs
bn
on the main bowl.
Note: The main bowl lid cannot be fitted if the mini bowl is not
located correctly.
3 Place the knife blade over the drive shaft
bo
.
4 Add the ingredients to be processed.
5 Fit the lid and switch on.
s
afety
●
Never remove the lid until the knife blade has completely
stopped.
●
T
he knife blade is very sharp - always handle with care.
i
mportant
●
Do not process spices – they may damage the plastic.
●
Do not process hard food such as coffee beans, ice cubes or
c
hocolate – they may damage the blade.
h
ints
●
Herbs are best chopped when clean and dry.
●
A
lways add a little liquid when blending cooked ingredients to
m
ake baby food.
●
Cut foods such as meat, bread, vegetables into cubes
a
pproximately 1-2 cm (
1
⁄2 –
3
⁄4 i
n) before processing.
●
W
hen making mayonnaise add the oil down the feed tube.
cs
attachment storage box
Your food processor is supplied with a storage box for your bowl
attachments and discs.
1 Fit the knife blade and discs into the storage box when not in
use
bq
.
2 The storage box is fitted with a safety lock - close the lid to lock.
To open, push the tab in
br
and lift up the lid
bs
.
ct
compact chopper/grinder (optional)
Use the compact chopper/grinder for processing dry ingredients
such as nuts, coffee beans and it is also suitable for processing
a range of spices such as: -
Black peppercorns, cardamom seeds, cumin seeds, coriander
seeds, fennel seeds, fresh ginger root, fresh chillies and whole
cloves.
sealing ring
blade unit
lid
jar
to use your compact chopper/grinder
1 Put your ingredients into the jar. Fill it no more than half full.
2 Fit the sealing ring to the blade unit.
3 Hold the underside of the blade unit and insert the blades into
the jar – turn anti-clockwise to lock
bt
.
4 Place the compact chopper/grinder onto the power unit and turn
clockwise to lock
ck
.
5 Use the Auto button, or select a speed (refer to the
recommended speed chart).
safety
●
Never fit the blade unit to your food processor without the jar
fitted.
●
Never unscrew the jar while the compact chopper/grinder is
fitted to your appliance.
●
Do not touch the sharp blades – Keep the blade unit away from
children.
●
Never remove the compact chopper/grinder until the blades
have completely stopped.
●
To ensure the long life of your compact chopper/grinder, do not
run it continuously for longer than 60 seconds. Switch off as
soon as you have got the right consistency.
8