Filter
Top Products
SECTION 2
Controls & Indicators
(LED Control Center)
Programming Auto Off Timer Feature
Set the Brewer to turn off two hours after the last brew.
1. Press the Power Button to turn on the Brewer.
2. Press the black Button to the right of the
‘AUTO OFF’ text on the LED Control Center
to turn on the Auto Off Timer feature (fig. 7)
The green light next to ‘AUTO OFF’ will
become illuminated. When the Auto Off Timer
is enabled, your Brewer will automatically turn
off two hours after your last brew.
3. To turn off the Auto Off Timer, simply press the
black Button again and the green light next to
‘AUTO OFF’ will turn off.
Cleaning External Parts
Regular cleaning of the Brewer’s external components is recommended.
1. Never immerse the Brewer in water or other liquids. The Housing and other
external components may be cleaned with a soapy, damp, non-abrasive cloth.
2. The Drip tray can accumulate up to 8 ounces of overflow. The Drip Tray
and Drip Tray Plate should be periodically inspected and rinsed clean. To
remove the Drip Tray Assembly, simply slide it toward you, keeping it level
at all times to avoid spilling. The Drip Tray and Drip Tray Plate are
dishwasher safe.
Cleaning the K-Cup Holder Assembly
1. Cleaning the Parts —The K-Cup
®
Holder
Assembly can be placed onto the top shelf of a
dishwasher. NOTE: Use low temperature cycles in
the dishwasher.
To remove from the Brewer,
open the cover by lifting the Handle. Grasp the
top of the K-Cup Holder with one hand while
pushing up on the bottom of the K-Cup Holder
from underneath with the other until it releases
(fig. 8). After cleaning, align the K-Cup Holder
with the opening using the two front ribs as a
guide and snap into place from the top.
SECTION 3
Cleaning & Maintenance
fig.
8
ADD WATER
DE-SCALE
HEATING
AUTO OFF
POWER
fig.
7
10