Filter
Top Products
Set-up
Helpful Hints
1. Keep your Brewer turned ‘ON’ at all times.
To brew a fresh cup of coffee, tea or hot cocoa
anytime you want, we suggest you keep your
Brewer turned ‘ON’ all the time. However, you
can set the Brewer to automatically turn off two
hours after your last brew. Follow the simple
instructions on page 10 to make using the
Brewer convenient for you.
2. For the best tasting gourmet coffee, tea or
hot cocoa Keurig
®
recommends using bottled
or filtered water.
Water quality varies from place to place. If you
notice an undesirable taste in your cup of coffee
such as chlorine or other mineral taste, we
recommend you consider using bottled water
or water from a filtration system.
3. Customize the Size, Flavor & Brew That’s
Perfect for You.
With the choice of over 200 varieties of K-Cups
and 2 brew sizes (Small Mug-7.25 oz. and Large
Mug-9.25 oz.) your Keurig Brewer gives you
endless options to customize the size, flavor
and brew that’s perfect for you. For a strong,
intense cup, select an Extra Bold K-Cup (with
up to 30% more ground coffee than regular
varieties) and brew size that’s right for you.
The smaller the brew size, the more intense
flavor in your cup. The larger the brew size,
the less intense flavor in your cup.
4. Plug Brewer into its own grounded outlet.
If the electric circuit is overloaded with other
appliances, your Brewer may not function
properly. The Brewer should be operated on
its own circuit, separate from other appliances.
5. Brewing into a travel mug.
To brew into a travel mug, simply remove the
Drip Tray Assembly and place the travel mug
on the Drip Tray Base.
6. De-scale Brewer regularly.
Please see page 12 for instructions.
Unpacking Instructions
1. Place Brewer box on a large steady surface
(such as a table or countertop) or on the floor.
Open the box.
2. Remove enclosed literature.
3. Turn the box on its side with front of box face
down.
4. Reach into the box and grasp the plastic
bag that contains the Brewer.
5. Carefully pull the plastic bag (and packaging
materials) toward you and out of the box. The
Brewer will still be encased in the polyfoam
and be on its side.
6. Remove the top polyfoam packaging material.
7. Carefully lift Brewer off of the bottom polyfoam
and place it upright on a flat, steady surface.
8. Lift plastic bag off of Brewer.
9. Record the serial number for this Brewer
on page 3 of this Guide. The serial number can
be found on the bottom of this box or on the
Brewer, behind the Drip Tray Assembly
(when removed).
10. Place the Brewer upright on a flat, steady
surface. Remove tape holding Water Reservoir
in place.
We recommend you save all packing materials in
case future shipping of the product is necessary.
WARNING:
Keep all plastic bags away
from children.
4