Filter
Top Products
6. If needed, you may simply push the toe panel back or forward
on the mounting rail.
7. With a Phillips screwdriver, tighten the toe panel clamping
screws on both sides.
8. Plug in dishwasher or reconnect power.
Complete Installation
1. Check to be sure all parts are now installed. If there is an
extra part, go back through the steps to see which step was
skipped.
2. Check to be sure you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. Read “Dishwasher Use” in the Drawer Dishwasher Use and
Care Guide.
If dishwasher does not operate, check the following:
■ Household fuse is intact and tight; or circuit breaker has not
tripped.
■ Electrical supply is connected.
■ See “Troubleshooting” in your Use and Care Guide.
toe panel
mounting rail
clamping
screw
15
YD40643/8546448_E_non-RFI 10/1/04 9:42 AM Page 15