Filter
Top Products
14
Display
When power is first supplied to the appliance or, when power has
been interrupted for more than 10 seconds, the clock will be set
to 12:00 P.M. To set the time, follow the instructions under
“Clock” section. To bypass setting the clock and begin using the
oven, touch Start, Off or Clear.
On 48" (121.9 cm) ranges, the left display shows the
18" (45.7 cm) oven and the right display shows the
30" (76.2 cm) oven.
When the oven(s) are in use (active mode), the display shows the
oven temperature, heat source(s) and timer, if set.
After approximately 2 minutes of inactivity, the display will go into
standby (sleep) mode. When the oven is in operation, the display
will remain active.
On 30" (76.2 cm) and 36" (91.4 cm) ranges, if the range is not in
use (sleep mode), the display shows the time of the day. To turn
the clock display on/off, see “Clock” section.
On 48" (121.9 cm) ranges, if the range is not in use (sleep mode)
the right display shows the time of day. To turn the clock display
on/off, see “Clock” section.
During programming, the display shows menus and the
appropriate selections for the respective cooking function.
Touch Screen
The LCD touch screen is used to make menu selections, adjust
settings and input commands.
Menu selections and input adjustments are made in the center
portion of the screen, and the command inputs (OK, Adjust
Settings, Browning, Back, etc.) are made in the bottom portion of
the screen. Screen titles and descriptions are displayed in the top
portion of the screen, which accepts no input. A light to medium
pressure touch of the fingertip will activate the menu selection.
Main Menus
From the Main Menu, all automatic cooking programs can be activated; all manual cooking can be programmed; settings can be
adjusted; and instructions, preparation and tips can be accessed.
A.Title/description region
B.Menu and selection/settings input region
C.Command input region
A
B
C