KitchenAid KFP1642CA Food Processor User Manual


 
22
TROUBLESHOOTING
If your food processor should fail to operate, check the
following:
– Make sure the work bowl and work bowl cover are properly
locked on the base, and the food pusher is inserted to the
maximum fill line on the feed tube.
– See if the food processor is plugged into a grounded 3
prong outlet. If it is, unplug the food processor, then plug it
into the same outlet again. If the food processor still does
not work, check the fuse or circuit breaker on the electrical
circuit the food processor is connected to and make sure the
circuit is closed.
If the food processor shuts off while it is running:
– The food processor may be overheated. If the motor exceeds
a certain temperature, it will automatically shut off to
prevent damage. This should be an extremely rare
occurrence. If it happens, press the Off Button and wait
15 minutes for the food processor to cool before resuming.
If the food processor still refuses to run, wait an additional
15 minutes for the food processor to cool.
If you have difficulty removing the food pusher from the
feed tube:
– Food particles are probably lodged in the interlock system.
To free the pusher, soak the work bowl cover in warm water
or wash it in a dishwasher.
If the problem cannot be corrected with the steps in this section,
see the KitchenAid Warranty and Service section on page 93*.
*Do not return the food processor to the retailer – they do not provide service.