Filter
Top Products
18
Preparing hot water
With this appliance, you can prepare hot water for making instant drinks,etc.
■ Place a cup beneath the steam nozzle and turn the selector knob for
steam/hot water to the position.
■ When the cup is sufficiently filled with hot water, return the selector knob
to the position.
Switching off the appliance
■ Place a receptacle beneath the espresso delivery pipe and press the key.
A rinsing operation will then be automatically carried out, after which the
appliance will switch itself off.
Note: This rinsing operation will also be carried out when the pre-set
automatic switch-off mechanism comes into play.
Cleaning and general care
■ Always pull out the mains plug before any cleaning operation and allow
the appliance to cool down. Do not use any materials which scratch, scrape
or corrode. Wipe the casing inside and outside with a moist cloth only.
■ Clean the drawer, drawer attachment, spent
coffee holder and base grid with warm water
and washing-up liquid (25).
■ Rinse out the water tank with fresh water.
■ Never put the appliance or any of its parts into
the dishwasher.
Caution! The steam nozzle can become
very hot. Be careful not to burn or scald
yourself. Never assemble or disassemble
the steam nozzle whilst it is hot.
■ Clean the steam nozzle immediately after the
milk-frothing operation by allowing the
appliance to produce steam for 1-2 seconds,
thus blowing any residue out of the nozzle.
Then wipe down the nozzle with a moist cloth.
If the nozzle has become blocked, clear it with
a needle. Where necessary, the steam nozzle
can be screwed out in an anticlockwise
direction using the hexagonal key on the
measuring spoon, after which it can be
thoroughly cleaned (26).
After cleaning, screw back the nozzle in a
clockwise direction.
25
26
appliance
indicator(s)