Filter
Top Products
EEB 9800.0 USA 21
Removing and installing the oven door
Removing the oven door
– Open the oven door as far
as it will go.
– Fold up the clamps on the
door hinges.
– Take hold of the oven door
on both sides and close it
slowly. When the oven door
is about half-closed, the
hinges will fall out of the
catches.
The oven door can now be
removed.
Reassembling the oven door
– Take hold of the oven
door on both sides and
push the hinges into
the appropiate holes on
the oven.
– Slowly open the oven
door until it is fully
open.
– Fold down the clamps
on the door hinges.
– Close the oven door.
Removing and installing the side racks
Removing the side racks.
– Loosen the screws.
– Remove the slot-in racks.
Installing side racks
– Insert side racks and tighten
down in front.
Folding heating element down/up
Folding heating element (top heat/grill) down
– Open lock and fold hea-
ting element down.
Folding heating element up
– Fold heating element up
and close again with
the lock.