Filter
Top Products
EEB 9800.0 USA 23
Replacing a halogen bulb
=
Attention! The halogen bulb become very hot after being in use for a
while. Only change the bulbs when they have cooled down.
=
Only replace the halogen bulbs with bulbs of the same type. You can
obtain new halogen bulbs from KÜPPERSBUSCH Customer Service.
F
Do not grip the halogen bulbs with your bare hands. Finger marks burn
into the bulb glass and reduce the light intensity and service life of the
bulbs.
=
If the fitting has become solid due e.g. to dirt or long use then glass may
splinter during removal. Hold a towel or cloth over the fitting to catch any
splinters.
Changing the halogen lamp:
– Unscrew the shelf rack.
– Carefully lever out the glass
cover with a screwdriver.
– Remove the halogen bulb from its socket.
– Hold the new bulb with a cloth (i.e. tissue) and
push it into the socket.
– Reinstall the glass cover.
– Screw the shelf rack on again.
Replacing the door sealing
=
Do not use the oven with damaged or missing door sealing!
If the sealing is damaged or can't be cleaned anymore, it must be replaced.
You can get a new sealing from KÜPPERSBUSCH Customer Service.
Removing the sealing
– To remove the sealing, gently
pull each corner out.
– Anschließend die beiden Mit-
telbefestigungen aushängen.
Fitting the new sealing
– Clasp one corner after the
other into the oven front. Be
sure not to bend or mutilate
the hooks!
– Die beiden Mittelbefestigungen wieder einhängen.
After Sales Service
In the event of a problem that you can’t easily fix yourself, or for spare part
service, please contact the Küppersbusch Customer Care line at
.
1-800-459-0844
F
Always have the information from the identification panel handy when
calling Customer Service.
The rating label for the oven is located on
the underside of the front panel and is visi-
ble when the oven door is open.
– Make a note of this information in case
you have to consult our customer service.
Production-no. oven
Model designation oven
Production number
Model