Filter
Top Products
Pag. 14
MAIN MENU
You can enter this menu pressing PROG button for 5 seconds.
The menu has the following parameters:
PAYMENT SYSTEM
Setting the payment system and its options.
SET TEMPERATURE
Setting temperatures and other boilers functions
OPTIONS: INSERT PASSWORD
You can enter the options menu with 2 programming levels: operator and
technician or manager.
Pag. 19
REGULAR MODE COUNTERS&AMOUNTS: regular mode counter.
TEST MODE COUNTERS&AMOUNTS: test mode working counter.
FREE MODE COUNTERS&AMOUNTS: free mode working counter.
RESET COUNTERS&AMOUNTS: Above counters zero resetting. Press “6” to
confirm or “5” to cancel.
ENABLE SLAVE MACHINE: Enabling the “slave” machine is not available.
ENABLE TEMPERAT.ON DISPLAY: Visualization of the boiler temperature
on the display.
SERIAL NUMBER: Machine serial number.
CAUTION ! OUTPUT TEST !: board electrical output test (see the chart on
page 20).
TYPE OF MACHINE: Machine model (please refer to the manufacturer before
changing it).
ENABLE AUTOMATIC WASHING: if enabled, the machine makes an auto-
matic washing cycle at the power-on.
DISPLAY COUNTERS ENABLE: if enabled, at the power-on the display will
show the total counter, which can’t be reset.
BOILER 1 WORKING: Boiler enabling.
Note 1: In order to avoid mixing group blocking, the software controls the powder
and water values as the following diagram shows: