Filter
Top Products
Pag. 18
OPTIONS: LEVEL 2 (manager- technician)
After you have inserted the correct password, which initially is “222”, the follow-
ing menu will appear:
MODIFY PASSWORD LEVEL 1: Insert the new password and press E to con-
firm.
MODIFY PASSWORD LEVEL 2: Insert the new password and press E to con-
firm.
SET DRINKS: See ”set drinks” chapter on page 21.
LOAD DEFAULT DATA: Original data loading. Press “6” to confirm or press
“5” to cancel it.
SET LANGUAGE: Language of all the messages.
SET DELAY POWDER: Time between the water and the powder supply, in
second tenths (see note 1).
SET WATER QUEUE: Water reserve without powder at the end of the selection
in second tenths (see note 1).
SET PAUSE ESPRESSO GROUP: Time for coffee ground drying, in second
tenths.
ENABLE BITTER DRINK AS DEFAULT: Function of sugar’s selections.
If ENABLE, the drink will be without sugar and the buttons A and B will
have the function of “sweet” and “extra sweet” respectively.
If DISABLED, the drink will be with sugar and the buttons A and B will
have the function of “no sugar” and “extra sweet” respectively.
PRE-GRINDING: pre-grinding function enabling
SET FILTER COUNTER: Counter for the message of anti-scale filter replacing.
Once reached, the machine will show “*” on display but it will keep on working
(see also on page 18).
SET NUMBER OF COFFEE GROUNDS: Counter for the message of coffee
grounds emptying. Once reached, the machine will show “EMPTY GROUNDS”
and it will stop (see also on page 24).
Pag. 15
PAYMENT SYSTEM
This menu has the following parameters:
SET COIN VALUE PARALLEL SYSTEM
Setting the coin values (see note 1).
DECIMAL POINT
Setting the decimal point of coins and prices values.
NAME OF CURRENCY
Setting the currency name.
SINGLE SALE NO CHANGE GIVEN
Setting the sale mode without keeping the residual credit.
MAXIMUM CHANGE GIVEN
Change maximum value ( only for MDB change giver systems).
TYPE OF PAYMENT SYSTEM
Payment system used in the machine (see note 2).
Note 1: This menu is only valid for parallel acceptors.
If you want to memorize the coin values proceed in the following way:
set the coin value with the numerical buttons
insert the coin in the acceptor
if the coin is accepted, the display will show the channel on which is
programmed
press F4 to confirm the memorization.
Repeat the procedure for the other coins.
Note 2: After programming the type of payment system, you have to go out of the
program with ESC and switch off the machine.
To use MDB payment systems, insert the red wire into the connector of the elec-
tronic board.