La Pavoni P180 Espresso Maker User Manual


 
Pag. 4
INSTALLATION
Before installing the machine, read carefully the manual.
The installation site must be level and dry.
ELECTRIC CONNECTION
Before connecting the machine to an electric plug, please follow these precau-
tions:
o The main supply must be suitable for the machine power requirements
(1600W).
o Check that the power supply voltage is the same as the one shown in the
rating label.
o Check that the main socket is correctly earthed.
o If the power supply cable is to be replaced, use only original cables.
The manufacturer will not accept responsibility for any damage
claiming if these precautions are not complied with.
The machine is provided with a general lighted switch, located on the back panel,
and with a security push button on the chassis that will cut off the power to the
electronic board when you open the door.
If you want to restore the power when the door is open, take out the push button.
All the machine electric devices work with a 24 VDC voltage, except for boiler
heating element and the transformer that work with 230 or 115 VAC.
Pag. 29
LEGEND
F WATER FILTER
VA ONE-WAY VALVE
D LIMESTONE FILTER (OPTIONAL)
CV FLOWMETER
P PUMP
V VALVOLA NON RITORNO
C BOILER
EV1 TEA ELECTROVALVE
EV2 MILK & CHOCOLATE ELECTROVALVE
EV3 NOT AVAILABLE
EVE ESPRESSO ELECTROVALVE
GE ESPRESSO BREWER
M1 TEA MIXING GROUP
M2 MILK & CHOCOLATE MIXING GROUP
S WASTE
U1 TEA OUTLET
U2 MILK & CHOCOLATE OUTLET
U3 NOT AVAILABLE
UC ESPRESSO OUTLET