Filter
Top Products
- 12 -
DIMENSIONS AND CLEARANCES
CAUTION: To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet
storage space located above the cooktop should be avoided. If cabinet storage
is provided, risk can be reduced by installing a range hood that projects
horizontally a minimum of 5” (12.7 cm) beyond the face of the cabinets.
INSTALLATION INSTRUCTIONS
Overhead cabinet should not exceed a maximum
depth of 13” (33 cm).
30” (76.2 cm) min. clearance
between the top of the
cooktop and the bottom of
an unprotected wood or
metal cabinet.
Min. recommended
distance between rear
edge of cutout and
nearest combustible
surface.
Min. from edge of
cooktop to nearest
combustible wall
(either side of unit).
Empty space is needed underneath
the cooktop for installation purposes.
Approximate location of junction box.
24” (61 cm) min. when bottom of
wood or metal cabinet is protected by
not less than 1/8” flame-retardant
millboard covered with no less than
No. 28 MGS sheet steel, 0.015” (0.4
mm) stainless steel, 0.024” (0.6 mm)
aluminum, or 0.020” (0.5 mm) copper.
Model H L
30” 7
1
/2” (191mm) 1
1
/2” (38mm)
LGE Internal Use OnlyCopyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes