Filter
Top Products
- 45 -
TROUBLE SHOOTING
* Flashing H
* Hob does not work
properly in
Induction
* Improper working
of control
The procedure of main functions
Check the pot or pan size refer to the cooking zone
Check unwanted thing is on the control part
Check the Installation state especially 5 mm Gap of Fig.5
It’s normal alarm message for initially Power up or after Power outage
For Releasing E1 display, just press On/Off Key one time
and then operate the desired Key
LGE Internal Use Only Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes