Filter
Top Products
LBR02
7
8
8
A delight in freshness
WFI1051 / EWTN 2956
14
Figure 11
REVERSING DOOR HINGES
Figure 10
The door hinges can be changed from one side to
the other if required.
1. Figure 10: Top: Unscrew the hinge pin (2) and
remove the screw (5) with the eccentric.
2. Swivel out the door at the top, ensuring that
you do not lose the stop (7) and bushing (8); lift
off the door and place it on the floor.
3. Center: Pull out the hinge pin (9) with its washer.
4. Swivel out the lower door, lift it out and place it
on the floor. Take care not to lose the stop (7)
and washers (8).
5. Unscrew all the door fittings (14, 15, 16, 17).
6. Figure 11: Unscrew all the door change frames
and exchange them with one another (6 with 8,
4 with 7 and handle - remove cover 1). Secure
them in position using the same screws.
7. Ensure that the door change frames are cor-
rectly positioned and mitered.
!
WARNING
Make sure the corners of the door change
frames are positioned correctly. Sharp
edges will be exposed if they are not
mitered or positioned correctly.