Filter
Top Products
CounterTop - 1300 Series Ops Manual
3
PURCHASER’S RESPONSIBILITY
It is the responsibility of the purchaser to:
1. See that the electric services for the oven are installed on site in accordance with the manufacturers
specifications.
2. Unload, uncrate, and install the oven in its proper location in accordance with this installation operation manual.
3. See that the electric services are connected properly by a qualified installer of your choice. All such connections
must be in accordance with applicable code requirements. Refer to page 6 for specific code references.
TABLE OF CONTENTS
WARRANTY AND SAFETY INFORMATION…………………………………………………………………...………… 2
WARRANTY………………………………………………………………………………………………………………..… 2
PURCHASER’S RESPONSIBILITY…………………………………………………………………………………..…… 3
UTILITY SPECIFICATION – ELECTRIC……………………………………………………………………………..…… 3
AMBIENT TEMPERATURE REQUIREMENTS………………………………………………………………………...… 3
MODEL NUMBER KEY…………………………………………………………………………………………………..…. 4
EXTERIOR DIMENSIONS……………………………………………………………………………………………..…… 5
OVEN ACCESSORIES…………………………………………………………………………………………………..…. 5
CODE REFERENCES…………………………………………………………………………………………………….… 6
VENTILATION GUIDELINES……………………………………………………………………………………………..… 6
GENERAL INFORMATION……………………………………………………………………………………………….… 6
UNLOADING AND UNCRATING………………………………………………………………………………………...… 6
ASSEMBLY INSTRUCTIONS…………………………………………………………………………………………….… 7
STACKING INSTRUCTIONS……………………………………………………………………………………………..… 8
MOUNTING INSTRUCTIONS……………………………………………………………………………………….………9
OVEN START-UP AND SHUTDOWN…………………………………………………………………………………..… 10
CLEANING INSTRUCTIONS…………………………………………………………………………………………….… 10
PREVENTIVE MAINTENANCE…………………………………………………………………………………………….. 11
HOW TO OBTAIN SERVICE…………………………………………………………………………………………….…. 11
FUNCTIONS – THERMAL CUT-OUT SWITCH………………………………………………………………………….. 11
CONVEYOR REMOVAL……………………………………………………………………………………………….……. 12
CONVEYOR DISASSEMBLY FOR CLEANING………………………………………………………………….………. 12
CONVEYOR REASSMBLY……………………………………………………………………………………….………… 13
FINGER REMOVAL AND DISASSEMBLY…………………………………………………………………….…………. 14
FINGER COLUMNATING PLATE IDENTIFICATION……………………………………………………..…………. 15-16
IMPINGER
®
CONCEPTS…………………………………………………………………………………..……………….. 17
APPENDIX A: LABEL DEFINITIONS………………………………………………………………………..…………. 18-19
UTILITY SPECIFICATION
IMPINGER
®
CONVEYOR OVEN
Model Input Rate Voltage Current Phase Hz # of Wires Agency Listing DB Level
1300 6 kW 200 VAC 28 Amps 1 50/60 Hz 3 NSF
1301 6 kW 208 VAC 27 Amps 1 60 Hz 3 UL, CSA, NSF
1302 6 kW 240 VAC 24 Amps 1 60 Hz 3 UL, CSA, NSF
1303 6 kW 220 VAC 27 Amps 1 50 Hz 3 NSF
1304 6 kW 240 VAC 24 Amps 1 50 Hz 3 NSF
1305 6 kW 380/220 VAC 15 Amps 1 50 Hz 4 DIN, NSF
1306 6 kW 415/240 VAC 14 Amps 1 50 Hz 4 NSF
1307 6 kW 200 VAC 16 Amps 3 50/60 Hz 5 NSF
1308 6 kW 380/220 VAC 9 Amps 3 50 Hz 5 NSF
1309 6 kW 415/240 VAC 8 Amps 3 50 Hz 5 NSF
1310 6 kW 220 VAC 27 Amps 1 60 Hz 3
1311 6 kW 380/220 VAC 9 Amps 3 60 Hz 5
1312-xxx-E 6 kW 400/230 VAC 9 Amps 3 50 Hz 5 NSF, CE Certified dba 70
1313-xxx-E 6 kW 400/230 VAC 15 Amps 1 50 Hz 3 NSF, CE Certified dba 70
NOTE: Do not install this (these) oven(s) in any area with an ambient temperature in excess of 95° F / 35° C. Doing so
will cause damage to unit.