Filter
Top Products
Setting the Knob Control(s) for Oven Indicator Light (selectmodels)
Baking and Roasting
(selectmodels) The oven indicator light, located on the backguard, turns
on whenever the oven turns on.
BROIL When the oven reaches the preset temperature, the indi-
cator light turns off. The oven indicator light will then
soo 2o0 turn off and on as the oven elements cycle off and on.
450
,oo 500 Oven Vent
350
OVENSET OVENTEMP When the oven is in use, the area near the oven vent
(Canadian Models) opening may feel warm or hot to the touch. Never
The OVEN TEMP knob is used to select and maintain the block the vent opening.
oven temperature. Always turn this knob just TO the desired _EN
temperature. Do not turn to a higher temperature and then back. _ T LOCATION
The OVEN SET (Canadian Models) knob determines the type
of oven operation. Turn this knob to the desired setting. Each
setting is identified by an indent (stop) and a "click" sound.
The oven will not operate if the OVEN SET knob is left in the
OFF position.
• On a coil element surface, be sure the drip bowl in the
vent location has a hole in the center. Do not cover the
BROIL
WARM drip bowl with aluminum foil.
2O0
450 250 OVEN VENT
OPENING
400 300
350
OVENSET OVENTEMP Oven Light
(CanadianModels)
Push the switch on the backguard toturn the oven
1. When cool, position rack in oven. light on and off.
2. Turn OVEN TEMP knob to desired temperature.
3. Turn OVEN SET knob to BAKE (Canadian Models).
4. Place food in center of oven,
5. Check food for doneness at minimum time in recipe.
Cook longer if necessary.
6. Remove food from the oven and turn the OVEN SET
(Canadian Models) and OVEN TEMP knob(s) to OFF.
10