Filter
Top Products
Clock and Timer Control (select models)
HOUR CLOCK
I--It--I. Q
+
I. nn
t-'-"-'
NOTE: The display will flash when the appliance is first connected to power or if power is interrupted. The display
will stop flashing once the time-of-day clock has been set.
Setting the Clock
2. To set timer for less time, press the TIMER pad,
1. Press the CLOCK pad. then press and hold the MIN. pad until the
2. Press and hold the HOUR pad to set the correct hours. To desired time appears in the display.
change the time by a single hour, give the pad a short tap. 3. To set the timer for more than one hour, press the
3. Press and hold the MIN. pad to set correct minutes. To TIMER pad, then press the HOUR pad. 1:59
change the time by a single minute, give the pad a short will appear in the display.
tap. • Press the MIN. pad until the desired minutes
appear in the display.
For example: To set the clock for 3:15, press and hold
the HOUR pad until 3 appears in the display. Then press When the time has elapsed, 0:00 will appear in the
and hold the MIN. pad until 15 appears in the display, display and continuous beeps will sound.
Press the CLOCK pad to cancel the beeps. The
current time of day will reappear in the display.
Setting the Timer
To cancel the timer: Press the CLOCK pad and the
The timer can be set from one minute (:01) up to 1 hour and display will return to the current time of day.
59 minutes (1:59). Time will be displayed in minutes and not
in seconds.
1. Press the TIMER pad.
• :59 (or one hour) will appear in the display.
• The timer will automatically begin counting down in
increments of one minute. The colon will flash.
6