Filter
Top Products
Coil Element Coil Elements Drip Bowls
Surface
• When an element is turned on, it will The drip bowls, located under each sur
cycle on and off to maintain the heat face element, are designed to catct
Lift-up Porcelain setting, boilovers and must always be used. Ab
Cook_op • Coil elements are self-cleaning, sence ofthese bowls during cooking ma_
damage wiring or otherparts underneatt
To prevent the cooktop from • Do not immerse in water, the cooktop.
discoloring or staining: To remove: When cool, raise element. Topreventtheriskofelectricshockorfire
• Clean cooktop after each use. Carefully pull out and away from recep- never linedrip bowls with aluminum foil
tacle. Dripbowlswilldiscolor(blue/gold stains
• Wipe acid or sugar spills as soon as _\\
thecooktophascooledasthesespills over time, if overheated. This discolora
may discolor or etch the porcelain. _ tion is permanent. However, it will no
affectcooking performance.
Yourrange features anupswept porcelain
cooktop that can be lifted up for conve-
nient accessto the areaunder thecooktop. TO protect drip bowl finish:
• Avoid using high heat settings for
To lift cooktop: When cool, grasp the To replace: Insert terminals on the ele- long periods of time.
front edge of the cooktop. Gently lift up ment into receptacle. Guide the element
until the two support rods at the front of intoplace. Gentlypressdownontheouter • Do not use oversized cookware.
the cooktop snap into place, edge ofthe element untilit sitslevel on the Pans should not extend more than
drip bowl. 1-2inches beyond the element.
_ ! _ • Whenhome canningor cookingwith
oversized pans, use the Canning
N Element(ModelCE1).Contact your
tERMINALS Maytag dealer for details or call• SUPPORT ROD
c ; ]\ 1-800-688-8408.
V • Cleanfrequently. (Seecleaning sec-
To lower cooktop: Hold the front edge of tion, page 8.)
the cooktop and carefully push back on
each support rod to release. Then gently
lower the top intoplace. Thesupport rods
will slide into the range frame.